Alternatives and similar repositories for HW-PCB:

Users that are interested in HW-PCB are comparing it to the libraries listed below

• openthermalcamera / HW-Firmware
  Firmware for the STM32F042F6 on the PCB
  ☆16Updated 5 years ago
• openthermalcamera / Android-Application
  Android application to display and take pictures of temperature map
  ☆34Updated 5 years ago
• Aylo6061 / PDHV
  ☆32Updated last year
• femtoduino / femu-hardware
  Femto ESP32 Micro USB
  ☆33Updated 3 years ago
• openscopeproject / HP34401a-OLED-HW
  HP34401a DMM OLED display mod hardware
  ☆25Updated 5 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• Jana-Marie / USB-PD-Firmware
  USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware
  ☆30Updated 5 years ago
• IRNAS / ToslinkCNC
  CNC machine control modules with Toslink optical cables
  ☆26Updated 7 years ago
• alvarop / usb_c_power
  ☆13Updated 4 years ago
• Jana-Marie / stm32f072-USB-PD
  stm32f072 USB-PD standalone firmware
  ☆16Updated 5 years ago
• fullyautomated / ferret
  Fully Automated line of USB-C PD PPS boards
  ☆18Updated 4 years ago
• astuder / epc901
  Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.
  ☆52Updated last year
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆12Updated 4 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• mike-rankin / ESP32_CoinCell_Color_TFT
  Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd
  ☆54Updated 3 years ago
• BigCorvus / SMA-Q2_replacement_board
  SMA-Q2_replacement_board
  ☆29Updated 4 years ago
• Jana-Marie / temperature-logger
  Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
  ☆60Updated last year
• briandorey / 10Mhz-Frequency-Standard-Distribution-Project
  10Mhz Frequency Standard Distribution Project pcb files and firmware
  ☆12Updated 2 years ago
• designer2k2 / 2d-xmas-tree
  a DIY flat christmas decoration with a ATtiny25, 20 led´s and a coin cell battery
  ☆25Updated 4 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆25Updated 6 years ago
• radhoo / digital_bench_power_supply
  A new design for a digital bench power supply built using the Atmega8.
  ☆8Updated 9 years ago
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 2 years ago
• jbtronics / PCBruler
  A PCB Ruler created in KiCAD
  ☆69Updated 6 years ago
• loxodes / emc_tools
  experimental open hardware e-field and h-field probes and LISN
  ☆25Updated 2 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• RoboticsBrno / RB0002-BatteryPack
  Universal Li-ion battery pack for robots
  ☆12Updated 4 years ago
• arturo182 / serpente_hw
  ☆35Updated 5 years ago
• dining-philosopher / litefeeder
  Semi-automatic passive printable/castable feeder for LitePlacer
  ☆57Updated 4 years ago
• jmgao / kicad-ngff
  NGFF (M.2) edge connector footprints and symbols for KiCAD
  ☆36Updated 4 years ago
• joshajohnson / rf-sig-gen
  MAX2871 based RF Signal Generator in an Adafruit Feather Form Factor
  ☆43Updated 4 years ago