openmv / qt-creatorLinks
☆11Updated last week
Alternatives and similar repositories for qt-creator
Users that are interested in qt-creator are comparing it to the libraries listed below
Sorting:
- Master control of robot using esp32 chip with openmv and tensorflow-lite support.☆11Updated 2 years ago
- OpenMV Documentation☆26Updated 6 months ago
- Face detection with MTCNN, TensorFlow Lite Micro and ESP32-S3☆22Updated 2 years ago
- Some sketches for the VL53L5CX ranging camera for use with the Arduino IDE☆22Updated 4 years ago
- 动手学ROS2硬件控制篇MicroROS学习板例程☆12Updated 2 years ago
- ☆25Updated 4 years ago
- PyQt-based application to control abstract remote PID regulator using customizable network interface☆41Updated 6 years ago
- The Micro Python project☆57Updated this week
- 基于STM32F103的智能机器人底盘工程代码,开发环境使用IAR☆18Updated 5 years ago
- PID可视化调参工具☆13Updated 7 years ago
- STM Code implementing Fuzzy Logic for PID to drive motor.☆23Updated 6 years ago
- An OLED_SSD1306 driver has been ported for STM32, ESP8266 and ESP32. Support for no operating system and FreeRTOS operating system.☆16Updated 5 years ago
- BUTTON full-featured driver library for general-purpose MCU and Linux.☆13Updated last month
- ICM-20948 library which is based on the ICM-20648 library from Silicon Labs.☆13Updated 2 years ago
- MicroROS on RT-Thread (ROS2).☆28Updated 3 years ago
- TensorFlow package for Cortex-M0-Plus, Cortex-M4, Cortex-M7, and Cortex-M55 CPUs.☆42Updated last year
- Signal & callback generic class for C++ applications☆11Updated 8 months ago
- ☆43Updated 3 years ago
- Qt-Creator project to run LittlevGL PC Simulator for Windows☆17Updated 6 years ago
- ☆29Updated 6 years ago
- ☆14Updated last week
- 以MPU6500-HMC5983-AK8975-BMP280-MS5611为传感元件的10轴IMU PCB,有三种不同尺寸的组合样式,Altium格式,可直接打样☆12Updated 4 years ago
- New MaixCDK will replace this repo: https://github.com/sipeed/MaixCDK☆68Updated 2 years ago
- mpu6050 algorithm to calculate euler angles and X/Y/Z axis displacement via six-axis data☆19Updated 7 years ago
- A port from Arjo's uSpeech library (originally intended for Arduino)☆14Updated 9 years ago
- ☆30Updated 4 years ago
- Samples project for H7PI,run on qspi flash☆12Updated 5 years ago
- BLE, IMU and LED Development Kit,Use nRF51822 + MPU6500 + WS2812B☆51Updated 9 years ago
- ros nodes on stm32 board with nuttx, a fork of ros2☆23Updated 9 years ago
- Firmware for u-blox NINA W102 WiFi/BT module☆20Updated 5 years ago