nfeske / dwc_otgLinks
USB host-controller driver for Raspberry Pi
☆15Updated 10 years ago
Alternatives and similar repositories for dwc_otg
Users that are interested in dwc_otg are comparing it to the libraries listed below
Sorting:
- Saleae 1-Wire Analyzer☆11Updated last year
- MBFTDI is application which allows to play SVF (Serial Vector Format) files and so execute JTAG commands on FPGA/CPLD chip. Special MBFDT…☆37Updated 3 years ago
- JTAG Tools For FTDI MPSSE Transports☆12Updated 10 years ago
- Allwinner V3s Boot ROM Reverse Engineering☆17Updated 4 years ago
- Here is a bunch of util IPs☆9Updated 6 years ago
- Simple pin assignment generator for IC case☆19Updated 8 years ago
- xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters …☆18Updated 5 years ago
- Simple RS232 UART☆12Updated 9 years ago
- LPC1759 USB bootloader based on a Mass Storage Device☆13Updated 8 years ago
- Read-only mirror of the official repo at git://sigrok.org/sigrok-dumps. Pull requests welcome. Please file bugreports at sigrok.org/bugzi…☆19Updated 8 months ago
- Open Flashloader for DLink and OpenOCD☆12Updated last month
- Yocto project for Xuantie RISC-V CPU☆39Updated last month
- RISC-V Debugger☆16Updated 2 months ago
- PS2 interface☆19Updated 7 years ago
- A RISC-V SBC based around the LambdaConcept USB2Sniffer FPGA board.☆28Updated 5 years ago
- minimalist example of SPI on an FT2232H chip in Linux. Based on AN_114☆16Updated 4 years ago
- Saleae JTAG Analyzer☆17Updated 2 months ago
- Universal USB video class driver for QNX 6.5 and above with V4L2 interface☆19Updated 9 years ago
- Freecores website☆19Updated 8 years ago
- The directory to save GD32VF103 DataSheets☆19Updated 4 years ago
- Opensource embedded controller firmware for sipeed boards.☆39Updated 6 years ago
- Raspberry Pi3 FreeRTOS (BCM2837)☆26Updated 5 years ago
- VDMA framebuffer driver for LVDS display☆14Updated 8 years ago
- Add-on for RedBear boards to work with Broadcom's WICED SDK☆17Updated 7 years ago
- Fork of OpenOCD that has RISC-V microcontroller support☆35Updated 3 months ago
- Python tools to interact with boundary scan-capable devices. Useful for reverse engineering, testing, etc.☆17Updated 9 years ago
- Communication channel from FPGA (Alterra EP4CE10) and Linux (Lichee PI Allwinner V3S)☆29Updated 5 years ago
- Example Hazard3 + OpenDAP RISC-V SWD SoC integration☆9Updated 2 years ago
- Deprecated, please use https://github.com/Nuclei-Software/nuclei-sdk☆21Updated 4 years ago
- forked from https://github.com/riscv/riscv-openocd.git,and add falsh support for LicheeTang☆24Updated 3 years ago