Alternatives and similar repositories for Open-Beam-Interface

Users that are interested in Open-Beam-Interface are comparing it to the libraries listed below

• will127534 / StarlightEye
  A IMX585 camera board designed for Raspberry Pi
  ☆222Updated 3 months ago
• dojoe / Twonkie
  A USB-PD sniffer/injector/sink based on Google's Twinkie, re-designed to be manufactured by mere mortals.
  ☆397Updated 2 months ago
• azonenberg / starshipraider
  Open hardware test equipment
  ☆183Updated last year
• benkrasnow / Temperature_sensing_stirbar
  Schematics, PCB layout, and firmware for an RFID temperature sensor
  ☆157Updated 2 years ago
• ngscopeclient / scopehal
  Test and measurement hardware abstraction library and protocol decodes. This is the library only. Most users should use scopehal-apps.
  ☆254Updated 2 weeks ago
• the-aerospace-corporation / satcat5
  SatCat5 is a mixed-media Ethernet switch that lets a variety of devices communicate on the same network.
  ☆472Updated 3 weeks ago
• QuantumVillage / UncutGem
  A prototype Full Stack fully Open Source NV Center Diamond Magnetometer
  ☆140Updated last month
• vapetrov / PCB_strain_gauge
  ☆111Updated last year
• jmwilson / oshw-active-probe
  2GHz single-ended active probe design
  ☆144Updated last year
• Labsmore / pyuscope
  Python machine vision platform
  ☆85Updated 5 months ago
• TinyTapeout / siliwiz
  Silicon Layout Wizard
  ☆188Updated last month
• drandyhaas / HaasoscopePro
  Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB oscilloscope
  ☆330Updated last week
• ngscopeclient / scopehal-apps
  ngscopeclient and other client applications for libscopehal.
  ☆780Updated 2 weeks ago
• marcoreps / ADRmu
  ADR1000 10V standard
  ☆133Updated 5 months ago
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆80Updated last year
• westonb / rogowski-relief
  rogowski coil current probe
  ☆201Updated 2 years ago
• benkrasnow / MultiSpectLED
  Array of 15 1W LEDs spanning 280nm to 940nm
  ☆105Updated 11 months ago
• EEVengers / ThunderScope
  ThunderScope GitHub Repo
  ☆1,175Updated last month
• sequoia-hope / rp2040-motor-controller
  A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.
  ☆41Updated last year
• will127534 / FourThirdsEye
  Open source Raspberry Pi 5 compatible Micro Four Thirds camera module based on IMX294
  ☆283Updated 4 months ago
• humancomputerintegration / ecoEDA
  This repository contains our software tool, ecoEDA, presented in the paper "ecoEDA: Recycling E-Waste during Electronics Design", which a…
  ☆131Updated last year
• schlae / cm5-reveng
  Reverse engineered Raspberry Pi Compute Module 5
  ☆254Updated 2 months ago
• Spirit532 / studio_mic
  A simple, easy to build preamplifier for any true condenser capsule, to make a condenser microphone
  ☆138Updated 2 years ago
• lawrie / fpga_pio
  An attempt to recreate the RP2040 PIO in an FPGA
  ☆305Updated last year
• OpenGammaProject / Open-Gamma-Detector
  ☢️👁️ Hardware for a hackable DIY gamma-ray spectrometer using a popular NaI(Tl) scintillator, SiPM and a Raspberry Pi Pico.
  ☆321Updated last week
• jaromir-sukuba / J-SMU
  DIY source-measure unit
  ☆167Updated 3 years ago
• thejackal360 / OpenSPICE
  Simulate electronic circuit using Python and the Ngspice / Xyce simulators
  ☆157Updated 2 years ago
• antmicro / gerber2ems
  Python interface to OpenEMS, for PCB trace simulation. Accepts Gerber files as input. Features automatic grid generation and postprocess…
  ☆176Updated 3 months ago
• steve-m / Pico-100BASE-TX
  Bit-banged 100 MBit/s Fast Ethernet transmitter and UDP framer for Raspberry Pi RP2040/RP2350
  ☆250Updated 3 weeks ago
• AnasMalas / pcb-edge-usb-c
  Use your PCB itself as a USB C connector! Including 10,14, and 24 Pin versions
  ☆547Updated 3 weeks ago