aeonSolutions / AeonLabs-AI-Volvo-MKII-Open-HardwareLinks
Volvo MKII Open Hardware
☆147Updated 10 months ago
Alternatives and similar repositories for AeonLabs-AI-Volvo-MKII-Open-Hardware
Users that are interested in AeonLabs-AI-Volvo-MKII-Open-Hardware are comparing it to the libraries listed below
Sorting:
- Firmware for the CANable USB to CAN adapter☆222Updated 2 years ago
- LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.☆83Updated 3 years ago
- Open source can bus analyzer software - with support for CANable / CANable2, CANFD, and other new features☆232Updated 2 years ago
- Main firmware of the Huebner inverter project☆176Updated 2 months ago
- STM32 CAN-bus bootloader☆78Updated 8 years ago
- 16s / 100A Battery Management System☆169Updated 11 months ago
- Open source project that uses the CANable hardware from protofusion.org☆40Updated last month
- gs_usb compatible firmware for candleLight, cantact and canable☆75Updated 4 years ago
- A CANopen protocol for all systems such as embedded, PC, etc.☆115Updated 2 years ago
- ☆240Updated 2 years ago
- Port of the Hubner Inverter to the TI C2000 architecture used by Tesla inverters.☆16Updated 2 years ago
- This is project SuperCAN. An open source USB to CAN-FD protocol.☆89Updated last month
- Firmware for LibreSolar BMS boards based on bq769x0, bq769x2 or ISL94202☆184Updated 5 months ago
- This is an Open Source Hardware USB to CAN-FD Interface☆71Updated 6 months ago
- slCAN compatible firmware for STM32f103C8T6☆75Updated 3 years ago
- Firmware for the DieBieMS☆55Updated 4 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆82Updated last year
- Implementation of Local interconnect network in c☆79Updated 4 months ago
- open source can bus analyzer software☆363Updated last year
- STM32 microcontroller with lots of periferials such as ADC, differential ADC, Input Capture, PWM, USB, Encoder, DAC, Digital Input, RTC, …☆138Updated last year
- XCAN PRO/PRO FD/FD USB2CAN firmware implementation for cheap STM32F4 hardware☆291Updated 3 years ago
- Open Source CANopen Stack☆62Updated 5 years ago
- Command-line tool to flashing devices by CAN-BUS☆86Updated 5 years ago
- A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.☆182Updated last week
- Eagle schematics of inverter main board, sensor boards and gate drivers☆71Updated 3 years ago
- Firmware to support gs_usb on most STM32 devices☆48Updated last week
- The bootloader used to flash our CAN-connected boards☆147Updated 2 years ago
- STM32 + MCP2515 CAN Example☆122Updated 2 years ago
- ☆110Updated last year
- Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.☆47Updated 3 years ago