Alternatives and similar repositories for Novena-RF

Users that are interested in Novena-RF are comparing it to the libraries listed below

• myriadrf / libfreesrp
  Small C++ library to interface with the FreeSRP
  ☆58Updated 3 years ago
• myriadrf / Parallella-RF
  300 MHz to 3800 MHz TCVR daughter card for the Parallella board
  ☆18Updated 11 years ago
• myriadrf / LMS7002M-driver
  A portable driver for the LMS7002M dual transceiver
  ☆30Updated 3 years ago
• FreeSRP / gr-osmosdr
  A fork of gr-osmosdr supporting the FreeSRP
  ☆21Updated 8 years ago
• devbisme / CAT-Board
  The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.
  ☆61Updated last year
• emeb / iceRadio
  C and Verilog sources for STM32F303 + iCE5LP4K Software Defined Radio
  ☆81Updated 8 years ago
• whitequark / Yumewatari
  妖刀夢渡
  ☆63Updated 6 years ago
• smunaut / iua
  ice40 USB Analyzer
  ☆57Updated 5 years ago
• greatscottgadgets / greatfet-hardware
  This repository is deprecated. Go to:
  ☆120Updated 6 years ago
• securelyfitz / WTFpga
  2 hour crash course in FPGAs
  ☆98Updated 4 years ago
• CarlosGS / iceDAQ
  Real time data acquisition based on the Lattice ICEstick hardware
  ☆14Updated 8 years ago
• mithro / HDMI2USB-litex-firmware
  A version of the HDMI2USB firmware based around the misoc+migen tools produced by m-labs.
  ☆15Updated 6 years ago
• greatscottgadgets / daisho
  SuperSpeed USB 3.0 FPGA platform
  ☆264Updated 10 years ago
• lambdaconcept / litesdcard
  ☆25Updated 7 years ago
• blackmesalabs / ice_zero_prog
  Python for BitBanging SPI PROM on IceZero FPGA board from RaspPi GPIO pins
  ☆13Updated 6 years ago
• cyrozap / openocd-xilinx-loader
  Some Python scripts to program Xilinx FPGAs using OpenOCD
  ☆24Updated 9 years ago
• DangerousPrototypes / BusPirateUltraHDL
  Verilog for the Bus Pirate Ultra FPGA
  ☆26Updated 6 years ago
• xesscorp / XuLA2
  Everything to do with the XuLA2 FPGA board: schematics, layout, firmware, example FPGA designs, documentation, etc.
  ☆53Updated 10 years ago
• alexforencich / ftjrev
  JTAG reverse engineering software for FTDI compatible cables
  ☆54Updated 11 years ago
• tinyfpga / TinyUSB
  USB Full-Speed core written in migen/LiteX
  ☆43Updated 6 years ago
• adamgreig / daqnet
  ☆63Updated 5 years ago
• timvideos / HDMI2USB-jahanzeb-firmware
  Original hand-coded firmware for the HDMI2USB - HDMI/DVI Capture - project
  ☆106Updated 9 years ago
• cliffordwolf / icotools
  Tools and Examples for IcoBoard
  ☆80Updated 4 years ago
• blackmesalabs / sump2
  open-source logic analyzer for FPGAs
  ☆99Updated 7 years ago
• mwelling / beagle-wire
  ICE40 FPGA Cape for Beaglebone
  ☆52Updated 5 years ago
• myriadrf / STREAM
  FPGA development platform for high-performance RF and digital design
  ☆32Updated 10 years ago
• myelin / teensy-openocd-remote-bitbang
  OpenOCD remote_bitbang protocol implemented on the Teensy 3.2 via USB serial
  ☆19Updated 9 years ago
• barawn / xvcd-anita
  XVCD implementation for ANITA. Note that "ftdi_xvc_core.c" is a generic libftdi-based MPSSE XVC handler, and is awesome.
  ☆18Updated 5 years ago
• timvideos / HDMI2USB-numato-opsis-hardware
  The Numato Opsis board is the first fully open source HDMI2USB board.
  ☆116Updated 7 years ago
• mithro / kicad-length-matching-checks
  Couple of scripts which checks length matching of your KiCad design.
  ☆26Updated 9 years ago