myriadrf / reference-development-kitLinks
The Myriad-RF Reference Hardware design files and firmware
☆48Updated 3 years ago
Alternatives and similar repositories for reference-development-kit
Users that are interested in reference-development-kit are comparing it to the libraries listed below
Sorting:
- ☆18Updated 10 years ago
- A portable driver for the LMS7002M dual transceiver☆29Updated 3 years ago
- FPGA development platform for high-performance RF and digital design☆32Updated 9 years ago
- Documentation for the Lime Microsystems Field Programmable RF (FPRF) Transceiver IC☆33Updated 9 years ago
- Cypress FX3 firmware for the USB 3.0 LimeSDR board☆67Updated 3 years ago
- EDA component libraries☆19Updated 8 years ago
- Small C++ library to interface with the FreeSRP☆58Updated 3 years ago
- 300 MHz to 3800 MHz TCVR daughter card for the Parallella board☆18Updated 11 years ago
- XTRX Software Defined Radio documentation files☆24Updated 5 years ago
- An Open Source Software Package that enables owners of DVB-T dongles with an embedded Realtek RTL2832U chipset to build models in Simulin…☆40Updated 11 years ago
- Open source SDR + COTS GPS board provides I and Q data plus COTS binary data over Ethernet.☆49Updated 6 years ago
- Documentation for the Lime Microsystems second generation transceiver IC☆106Updated 4 years ago
- RF power detector board design files☆18Updated 8 years ago
- LimeSDR-Mini board FPGA project☆61Updated 3 years ago
- The FPGA design for the FreeSRP's Artix 7 FPGA☆25Updated 8 years ago
- A Vivaldi antenna designed for 5.5GHz and 10GHz use☆23Updated 7 years ago
- FMCW radar design files☆155Updated 8 years ago
- ☆28Updated 6 years ago
- Altera Cyclone IV FPGA project for the USB 3.0 LimeSDR board☆105Updated 4 years ago
- A simple, low-power, low-cost 5.8-6.0 GHz microwave FMCW radar☆111Updated 10 years ago
- AMSAT Fox-1 satellite Maximum Power Point Tracker hardware design files☆60Updated 3 years ago
- Controller electonics and firmware for SatNOGS rotator☆40Updated 6 years ago
- pyLMS7002M Python package.☆51Updated 7 years ago
- Upconverter 125MHz v1.3 - Passive Upconverter Hardware Design for SDR☆80Updated 9 years ago
- Pre-built XTRX packages and firmware images☆44Updated 3 years ago
- C and Verilog sources for STM32F303 + iCE5LP4K Software Defined Radio☆81Updated 8 years ago
- The CAT Board is a Raspberry Pi HAT with a Lattice iCE40HX FPGA.☆62Updated last year
- RTL-SDR Spectrum Analyzer for BeagleBone Black (BBB)☆95Updated 12 years ago
- Altera Cyclone IV FPGA project for the PCIe LimeSDR board☆40Updated 2 years ago
- OpenCL/GPU-enabled common blocks for GNURadio☆85Updated 2 years ago