Alternatives and similar repositories for OBD2_K-line_Reader

Users that are interested in OBD2_K-line_Reader are comparing it to the libraries listed below

• domnulvlad / KLineKWP1281Lib
  Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)
  ☆61Updated 10 months ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆51Updated 5 months ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆293Updated 5 months ago
• coniferconifer / ESP32-ECU-emulator
  ECU emulator by ESP32 with TJA1050 for OBD2 print test
  ☆53Updated last year
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆266Updated 2 years ago
• collin80 / ESP32RET
  CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)
  ☆316Updated 8 months ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆52Updated 4 years ago
• collin80 / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆345Updated 5 months ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆136Updated last year
• spoonieau / OBD2-ECU-Simulator
  Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'
  ☆58Updated 5 years ago
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆67Updated 3 months ago
• bri3d / esp32-isotp-ble-bridge
  ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware
  ☆39Updated 2 years ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆41Updated last year
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆84Updated 10 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆43Updated 3 years ago
• darkspr1te / elm327_clone
  ELM327 firmware for pic18f25k80 chip from china clone OBD2 diag boxes
  ☆40Updated 7 years ago
• nopnop2002 / Arduino-CANBus-Monitor
  mcp2515 canbus module to Monitor Canbus traffic
  ☆41Updated last year
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆66Updated 3 years ago
• autowp / CANreader
  Android CAN client
  ☆61Updated 8 years ago
• BretStateham / arduino-ecu-simulator
  Arduino ECU Simulator
  ☆20Updated 6 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆116Updated 11 months ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆130Updated 3 months ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆80Updated 5 years ago
• an-ven / VW-Instrument-Cluster-Controller
  Arduino and MCP2515 CAN bus VW Instrument Cluster Controller
  ☆44Updated last year
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆64Updated 6 years ago
• dedalqq / esp32-mcp2515
  MCP2515 CAN interface library for using on esp32/esp8266
  ☆65Updated 4 years ago
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆20Updated last year
• RXTX4816 / OBD-KKL-KW1281-ARDUINO-TRIPCOMPUTER
  Display information of your KW1281 K-Line VAG vehicle on a display controlled by an Arduino Uno (Or similar).
  ☆34Updated 10 months ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆105Updated last month
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆113Updated 3 years ago