dchad / OBD-MonitorLinks
Tools for interfacing with vehicle engine control units using the OBD-II protocol.
☆72Updated 4 years ago
Alternatives and similar repositories for OBD-Monitor
Users that are interested in OBD-Monitor are comparing it to the libraries listed below
Sorting:
- OBD-II ECU Simulator☆64Updated 4 years ago
- Android CAN client☆61Updated 8 years ago
- ELM327-based OBD-II Bluetooth interface☆80Updated 5 years ago
- ELM327 based vehicle's CAN bus sniffer☆64Updated 6 years ago
- Use ELM327 bluetooth device to evaluate all packages sent through CAN on OBD2 interface.☆52Updated 7 years ago
- Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.☆43Updated 5 years ago
- This is a small example sketch that simulates a cars ecu☆80Updated 4 years ago
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆84Updated 10 years ago
- Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'☆58Updated 5 years ago
- Offline Reverse Engineering Tools for Automotive Networks☆51Updated 2 years ago
- Open-source ELM327 OBD adapter☆38Updated 9 years ago
- CAN bus logger and analyser tool☆63Updated 6 years ago
- ☆25Updated 5 years ago
- Volkswagen Audi Group CANBus diagnostic and ECU firmware flashing☆35Updated 9 years ago
- Open source engine tuning software for Mazda platforms.☆107Updated 4 years ago
- BSD Licensed tool written in C for management of Bosch ME7.x firmwares, config files are specifically targeted at Ferrari 360 in current …☆19Updated 2 years ago
- J2534 drivers for various Macchina hardware☆101Updated 3 years ago
- Automotive tuning tool☆82Updated 2 weeks ago
- DS2 K-line library for Arduino and ESP32☆51Updated 5 months ago
- KWP2000 library for Java☆21Updated 9 years ago
- BSD Licensed tool written in C for Bosch ME7.x EEPROM data dump checksum validations. Specifically validates dump files for 95040 IC 512b…☆12Updated 12 years ago
- Tunerpro checksum plugins for GM PCM files☆47Updated 11 months ago
- Trionic 5/7/8 CANbus flasher with J2534 support☆22Updated 6 months ago
- The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…☆269Updated 2 years ago
- VAGCANLOGGER - KW1281 & VW TP 2.0☆33Updated 11 years ago
- Designs for the Macchina M2☆93Updated 4 years ago
- Examples of Arduino code used to communicate with canbus.☆10Updated 8 years ago
- Qt OBD II Digital Instrument Cluster☆62Updated 2 years ago
- Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter☆113Updated 4 years ago
- FoA Orion Repository☆71Updated 3 weeks ago