Alternatives and similar repositories for OBD9141

Users that are interested in OBD9141 are comparing it to the libraries listed below

• latonita / arduino-canbus-monitor
  Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…
  ☆326Updated this week
• autowp / can-usb
  Arduino sketch for CAN-BUS adapter
  ☆110Updated 9 years ago
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆273Updated 2 years ago
• collin80 / ESP32RET
  CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)
  ☆327Updated 9 months ago
• autowp / arduino-canhacker
  CanHacker (lawicel) CAN adapter on Arduino + MCP2515
  ☆446Updated last year
• collin80 / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆351Updated 7 months ago
• Longan-Labs / Arduino_CAN_BUS_MCP2515
  Arduino CAN Bus library, MCP2515/MCP2551
  ☆148Updated last year
• HerrRiebmann / KDS2Bluetooth
  Kawasaki Diagnostic Service Reader via Bluetooth
  ☆171Updated 2 years ago
• collin80 / due_can
  Object oriented canbus library for Arduino Due compatible boards
  ☆259Updated 3 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆44Updated 3 years ago
• autowp / CANreader
  Android CAN client
  ☆63Updated 8 years ago
• sandeepmistry / arduino-OBD2
  An Arduino library for reading OBD-II data from your car over CAN bus
  ☆526Updated 2 years ago
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆67Updated 2 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆52Updated 6 months ago
• miwagner / ESP32-Arduino-CAN
  An Arduino CAN-Bus library for ESP32
  ☆376Updated last year
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆112Updated 5 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆118Updated last year
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 3 years ago
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆44Updated 2 months ago
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino
  ☆132Updated last month
• Hell-Fire / WidebandO2
  An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts
  ☆82Updated 12 years ago
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆106Updated 7 years ago
• coryjfowler / MCP_CAN_lib
  MCP_CAN Library
  ☆784Updated 7 months ago
• fjvva / ecu-tool
  Tool to communicate with vehicle ECUs based on Arduino
  ☆215Updated 10 years ago
• nberlette / bmw-dbc
  BMW E90 & E39 CAN definitions
  ☆36Updated 4 years ago
• ibanezgomez / FISBlocks
  Device based on Arduino to play with VAG KWP1281
  ☆120Updated 7 years ago
• bill57p9 / BMW_ZGW_emulator
  BMW CANbus gateway emulator & proxy
  ☆21Updated 4 years ago
• angelovAlex / can-bus-w211
  ☆38Updated 8 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆195Updated 6 years ago
• limiter121 / esp32-obd2-emulator
  Open-source OBD-II emulator based on an ESP32 + CAN transceiver IC, controllable via WiFi through a simple web UI (or via API)
  ☆456Updated 7 years ago