Alternatives and similar repositories for FISBlocks

Users that are interested in FISBlocks are comparing it to the libraries listed below

• adamforbes92 / FISCuntrol
  FIS Control for the masses.
  ☆52Updated 7 years ago
• domnulvlad / KLineKWP1281Lib
  Arduino / ESP / RPi Pico library integrating the proprietary VAG Key-Word 1281 protocol (KWP1281/KW1281)
  ☆67Updated last year
• tomaskovacik / VAGFISWriter
  Arduino library for writing to V.A.G. cluster display over 3line protocol (no can-bus)
  ☆24Updated 3 years ago
• turboat / eepromtool
  ☆53Updated 2 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆45Updated 3 years ago
• tsharp42 / E46ClusterDriver
  An Arduino sketch and schematic for the hardware to drive a BMW instrument cluster over CAN-BUS, KBUS and general IO lines. The firmware …
  ☆41Updated 10 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆88Updated 11 years ago
• piersholt / wilhelm-docs
  BMW I/K-Bus Documentation
  ☆125Updated 3 weeks ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆321Updated 10 months ago
• tomaskovacik / vwcdavr
  AVR alternative to vwcdpic HW+SW
  ☆60Updated 3 years ago
• pavelmalik / BMWCanBridge
  Arduino Due solution for adding vin-coded modules to BMW cars
  ☆66Updated 7 years ago
• vtl / volvo-cem-cracker
  Volvo central electronic module pin cracker via OBD for P1, P2 and P3 platforms
  ☆167Updated last month
• baconwaifu / PyVCDS
  An attempt at re-implementing VCDS in python and socketCAN, using publicly available information and black-box reverse engineering.
  ☆96Updated 2 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆115Updated 5 years ago
• olegel / VolvoCan
  Volvo XC90 CAN bus adapter to restore wheel buttons and park assistant functionality
  ☆45Updated 4 years ago
• mkirbst / lupo-gti-tripcomputer-kw1281
  A tripcomputer for VW Lupo GTI using kw1281 protocoll
  ☆27Updated 8 years ago
• gmenounos / kw1281test
  VW KW1281 Protocol Test Tool
  ☆218Updated 2 months ago
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆67Updated 4 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆120Updated 3 years ago
• speeduino / Ardu-Stim
  ☆156Updated 2 weeks ago
• mrfixpl / MQB-sniffer
  CAN-BUS sniffing for Volkswagen Golf MK7 (and most likely other MQB platform cars)
  ☆83Updated last month
• arildlangseid / vw_t4_tcu_temp_to_fis
  Arduino project to readout Automatic Transmission Fluid Temp and write to FIS display
  ☆26Updated 2 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆124Updated last year
• an-ven / VW-Instrument-Cluster-Controller
  Arduino and MCP2515 CAN bus VW Instrument Cluster Controller
  ☆51Updated 2 years ago
• laurynas / volvo_crankshaft
  Volvo V50 RTI Crankshaft project
  ☆64Updated 4 years ago
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆37Updated 5 years ago
• Hell-Fire / WidebandO2
  An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts
  ☆85Updated 12 years ago
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆289Updated 3 years ago
• mck1117 / wideband
  ☆65Updated last month
• smartgauges / canbox
  Firmware for canbus boxes
  ☆113Updated 6 months ago