fread-ink / inkwaveLinks
Convert electronic paper display waveforms from .wbf to .wrf format
☆37Updated 3 years ago
Alternatives and similar repositories for inkwave
Users that are interested in inkwave are comparing it to the libraries listed below
Sorting:
- Ultra low cost HDMI-USB Video Acquisition (HDMI Capture Card) based on MS2109☆57Updated 2 years ago
- ice40 FPGA eink controller☆114Updated 5 years ago
- Next gen. of NekoCal: An open-source hackable and programmable e-paper display☆102Updated last year
- Patches include sunxi platform support and various driver fixes☆82Updated 4 months ago
- Reverse engineering notes on the RK3566 EBC controller #pinenote☆18Updated 3 years ago
- Run an executable from RAM on a Bouffalo MCU (BL602 or BL808)☆22Updated 2 years ago
- Linux kernel framebuffer driver for Waveshare E-Ink displays☆17Updated 6 years ago
- A simple M.2 NVMe to miniPCIe adapter☆24Updated last year
- Documentation of the BL602 IC☆65Updated 2 years ago
- Driver ICs for EPD☆49Updated last year
- USB-PD charger as a programmable power supply.☆66Updated 4 years ago
- A modern port of OpenOCD to WCH-Link RISC-V (see project wiki)☆22Updated 3 years ago
- NGFF (M.2) edge connector footprints and symbols for KiCAD☆38Updated 5 years ago
- NixOS on Allwinner D1 RISC-V☆39Updated 2 years ago
- CH570 is the world’s cheapest RISC-V 2.4GHz wireless & USB2 SoC, costing just about a dime (10 cents)!☆50Updated 3 weeks ago
- Using the ch32v003 as a temperature sensor☆18Updated last year
- Reverse engineering, notes, and example code for the RISC-V MCU inside the RK3566 SoC☆32Updated last year
- Allwinner V3s Boot ROM Reverse Engineering☆15Updated 4 years ago
- An Ethernet to SPI converter using 7400-series ICs☆65Updated 2 years ago
- CH32V UF2 bootloader☆47Updated 9 months ago
- Linux virtual Ethernet driver and utility enabling BL808 Linux to use on-chip Wi-Fi☆23Updated last year
- PCBs designed by Icenowy☆27Updated 3 years ago
- Development board for Lattice Crosslink-NX 72QFN☆29Updated 4 years ago
- An USB to Serial bridge based on CH55x series MCU.☆23Updated 9 months ago
- KiCad bus length matching script.☆30Updated 11 months ago
- A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design☆59Updated 6 months ago
- Buildroot for the LicheePi Zero board☆34Updated 7 years ago
- Config files for full Lichee Pi Nano Linux image build☆119Updated last year
- Code for my LCD driving blog posts☆29Updated last year
- USB Keyboard Adapter for old ThinkPad keyboards☆38Updated 8 years ago