Alternatives and similar repositories for Franko:

Users that are interested in Franko are comparing it to the libraries listed below

• ghmartin77 / B-ROBOT_EVO2_ESP32
  ESP32 port of JJRobots brilliant B-ROBOT_EVO2
  ☆58Updated 3 years ago
• jjrobots / B-ROBOT
  B-ROBOT Arduino self balancing robot from JJROBOTS.com
  ☆110Updated 4 years ago
• rppelayo / arduino-self-balancing-robot
  ☆72Updated last year
• jarzebski / Arduino-KalmanFilter
  Kalman Filter for Arduino
  ☆96Updated 7 years ago
• TKJElectronics / BalancingRobotArduino
  This is the Arduino version of the code for my balancing robot/segway
  ☆75Updated 11 years ago
• TKJElectronics / Balanduino
  Git repository for the Balanduino balancing robot
  ☆133Updated 3 years ago
• trandi / esp32-self_balancing_robot
  3D printed self balancing robot using and ESP32 for the brains, MPU6050 for gyros & accelerometres and DRV8825 to drive the 2 servo motor…
  ☆81Updated 7 years ago
• PepeTheFroggie / EspCopter
  ESP8266 based QuadCopter
  ☆96Updated last year
• adafruit / Adafruit-16-Channel-PWM-Servo-Driver-PCB
  Adafruit 16-Channel PWM Servo Driver PCB Eagle Files
  ☆64Updated 5 years ago
• DonnyCraft1 / PIDArduino
  A simple PID library for Arduino
  ☆46Updated 3 years ago
• JJulio / b-robot
  Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.
  ☆148Updated 10 years ago
• elchals / Manolo-self-balancig-robot-by-ElChals
  A self balancing robot code with steppers and IMU mpu6050
  ☆11Updated 9 years ago
• T-Kuhn / ESP32-MicroRobotArm
  Micro Robot Arm with ESP32 and 28BY-48 12V steppers
  ☆82Updated 5 years ago
• elkayem / ZippyTheBalancingRobot
  A 3D printed balancing robot
  ☆73Updated 7 years ago
• catphish / flight_controller
  Arduino Quadcopter Controller
  ☆35Updated 11 years ago
• farrellf / Balancing_Robot_Firmware
  ☆50Updated 8 years ago
• tarunsharma1 / quadcopterarduino
  Arduino code for a quadcopter which uses an mpu 6050 imu to read accelerometer , gyro and magnetometer readings and run it through a PID …
  ☆19Updated 10 years ago
• kriswiner / MPU6050HMC5883AHRS
  9 DoF sensor fusion with AHRS output for MPU-6050 gyro/accel + HMC5883 magnetometer sensor
  ☆30Updated 3 years ago
• daPhoosa / MedianFilter
  Simple Median Filter library designed for the Arduino Platform
  ☆61Updated 4 years ago
• bitcraze / Bitcraze_PMW3901
  Arduino driver for PMW3901 optical flow sensor
  ☆62Updated 2 years ago
• kriswiner / ESP8266_Flight_Controller
  ☆27Updated 7 years ago
• 1988kramer / motor_control
  Classes for control of a differential drive robot using PID control of DC motors
  ☆48Updated 8 years ago
• jjrobots / B-ROBOT_EVO2
  New and improved version of our Balancing Robot B-ROBOT
  ☆85Updated 7 years ago
• osoyoo / Osoyoo-development-kits
  ☆17Updated 11 months ago
• MichalSchwarz / rc-controller
  ☆11Updated 5 years ago
• verlab / espcopter
  This repo contains the firmware of espcopter.
  ☆42Updated 5 years ago
• josealejandro2928 / Self-Balancing-Arduino-Robot-Controller
  A two-wheeled self-balancing robot based on an Arduino micro controller and 12 V DC motors. A logic is implemented on top of a cascaded P…
  ☆15Updated 2 years ago
• raydike / PID_position_OK
  Arduino PID motor position control
  ☆39Updated 7 years ago
• execuc / multwii-brushed-nrf24l01
  Modified version of Multwii to work with brushed motors and nrf24L01 2.4G module.
  ☆13Updated 8 years ago
• Seeed-Studio / Seeed_Arduino_IMU10DOF
  Combination of MPU-9250 and BMP180, I2C device selectable.
  ☆34Updated 3 months ago