ttlappalainen / CAN_BUS_ShieldLinks
CAN Bus Shield - MCP2515&MCP2551
☆14Updated 4 years ago
Alternatives and similar repositories for CAN_BUS_Shield
Users that are interested in CAN_BUS_Shield are comparing it to the libraries listed below
Sorting:
- Inherited object for use NMEA2000 library for Arduino Boards with MCP2515 CAN bus controller.☆20Updated 4 years ago
- This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…☆27Updated 4 years ago
- Inherited object for use NMEA2000 with ESP32 boards☆82Updated last year
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆83Updated 3 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆64Updated 3 years ago
- This repository shows how to use the M5Stack as NMEA 2000 Display and WiFi Gateway.☆42Updated 3 years ago
- Remote Control for an Evolution EV-1 Auto Pilot via NMEA2000/SeatalkNG.☆24Updated 3 years ago
- A small NMEA0183 parser☆18Updated 12 years ago
- Library for handling NMEA0183 messages☆86Updated 11 months ago
- AIS Encoder Add-On for NMEA2000/NMEA0183 Library of Timo Lappalainen☆13Updated last year
- Object oriented canbus library for Atmel AVR CPUs used with the Arduino IDE.☆41Updated 3 years ago
- A compact Arduino library to parse NMEA sentences.☆103Updated 3 years ago
- IFCT - Improved FlexCAN Teensy Library☆11Updated 6 years ago
- Open-source electronics for your boat☆49Updated 5 years ago
- Arduino Library for CAN Bed☆27Updated 4 years ago
- Sailor Hat for ESP32 hardware☆47Updated 10 months ago
- CAN driver project for the Espressif ESP32☆27Updated 4 years ago
- Embedded Software for UCCB STM32 microcontroller.☆25Updated 5 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated last year
- An ESP32 based gateway to read NMEA0183 AIS messages and transform them to NMEA2000 PGNs.☆38Updated 2 years ago
- Library for using the INA233 ADC/I2C with Arduino. It makes easier the INA233 configuration from the maximum current and maximum voltage …☆10Updated 4 years ago
- Arduino library for controlling the MCP2515 in order to receive/transmit CAN frames.☆98Updated 2 weeks ago
- Material für den NMEA2000-Workshop.☆42Updated last month
- Arduino and CMake library for communicating with uBlox GPS receivers.☆110Updated last year
- CAN_Interface for ESP32 (Cannelloni Protocol)☆56Updated 4 years ago
- This repository shows how to build a Seatalk Autopilot Remote Control device based on an Arduino ProMicro and a simple 433 MHz KeyFob.☆67Updated 2 months ago
- nmea2000 gateway with ESP32☆83Updated 3 months ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆38Updated 5 years ago
- Remote control for anchor chain that shows current chain lengtht via WLAN to phone/tablet.☆17Updated 4 years ago
- Universal Signal K sensor framework for the ESP32 platform☆181Updated 3 weeks ago