Alternatives and similar repositories for lc29h

Users that are interested in lc29h are comparing it to the libraries listed below

• GNSSOEM / ELT_RTKBase
  Raspbian compatible RtkBase software for Unicore UM98x, Bynav M2x and Septentrio Mosaic X5
  ☆59Updated last week
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆62Updated last year
• goblimey / ntripcaster
  Docker file and instructions to build and run the BKG NTRIP caster
  ☆118Updated last year
• semuconsulting / pygnssutils
  Python GNSS CLI utility library for reading, parsing and broadcasting NMEA, UBX, SBF, RTCM3, NTRIP and SPARTN protocols
  ☆125Updated 3 weeks ago
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆100Updated 3 weeks ago
• jacobjhansen / RTCM-Pi
  GNSS Base Station based on Raspberry Pi 4B
  ☆49Updated 2 years ago
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆39Updated 2 years ago
• pbeyssac / millipede-caster
  The Millipede NTRIP/RTK caster
  ☆30Updated this week
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆112Updated 2 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆95Updated 6 years ago
• Stefal / rtkbase
  Your own GNSS base station for RTK localization with a Web GUI
  ☆664Updated this week
• eringerli / RpiNtripBase
  ☆50Updated 4 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆21Updated last year
• u-blox / ublox-C099_F9P-uCS
  ☆63Updated 5 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• CentipedeRTK / pi-gen_RTKbase
  fork for RTKbase https://github.com/Stefal/rtkbase. Tool used to create the raspberrypi.org Raspbian images
  ☆23Updated last year
• simeononsecurity / docker-rtklib-onocoy-rtkdirect
  Docker Container that Takes in USB or TCP Based Serial GPS Receiver Output and Forwards the Data to Either Onocoy or RTKDirect or Both.
  ☆17Updated 7 months ago
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆185Updated 6 years ago
• ardusimple / simpleRTK2B
  Useful code to work with Ardusimple simpleRTK2B application board
  ☆37Updated 3 years ago
• rokubun / gnss_tools
  Docker that encapsulates various GNSS processing tools
  ☆20Updated 3 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• Node-NTRIP / caster
  Node.js NTRIP caster library with full NTRIP V1/V2 support and more.
  ☆51Updated 2 years ago
• CentipedeRTK / RtkBaseVar
  🛰️ 📡 Broadcasting the RTCM3 correction from the nearest RTK base 📍
  ☆20Updated last year
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆40Updated this week
• semuconsulting / pyubx2
  Python library for parsing and generating UBX GPS/GNSS protocol messages.
  ☆234Updated 3 weeks ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆58Updated 6 years ago
• charlesquick / ntripcaster-containerised
  Another containerised ntripcaster!
  ☆21Updated last year
• taroz / GNSS-Radar
  GNSS-Radar is a web application to show the current GNSS constellation
  ☆94Updated 11 years ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year