Alternatives and similar repositories for NEO-M8T_GNSS_FeatherWing

Users that are interested in NEO-M8T_GNSS_FeatherWing are comparing it to the libraries listed below

• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated last month
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago
• sparkfun / SparkFun_RTK_Facet
  The hardware and enclosure for the popular centimeter level RTK Facet GNSS receiver with built in display.
  ☆22Updated 11 months ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆22Updated last year
• sparkfun / SparkFun_RTK_Firmware
  Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
  ☆101Updated last week
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆41Updated 6 years ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• ldab / u-blox_GNSS
  u-blox GNSS receiver library light weight for low power tracking application
  ☆26Updated 5 years ago
• Francklin2 / RTKLIB_Touchscreen_GUI
  RTKLIB GUI for Raspberry Pi with touchscreen made with Qt by the ENSG students
  ☆183Updated 6 years ago
• ZakKemble / Si446x
  Si4463 Radio Library for AVR and Arduino
  ☆80Updated last year
• Archfx / RTK-NTRIP-RTCM
  Contains program to Send RTCM3 📡 data to Hosted NTRIP server and fetch NTRIP data and display on another rover. Real time kinematic supp…
  ☆28Updated 2 years ago
• sparkfun / SparkFun_RTK_Everywhere_Firmware
  Centimeter precision GPS/GNSS using L1/L2/L5 signals broadcast over Bluetooth, WiFi, and Ethernet.
  ☆38Updated last week
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆32Updated 3 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆110Updated 2 years ago
• introlab / OpenIMU-MiniLogger
  OpenIMU - Open Hardware Mini Logger based on ESP32
  ☆42Updated 3 years ago
• sparkfun / Qwiic_GPS-RTK2
  A breakout board for the ZED-F9P GNSS RTK capable module from u-blox.
  ☆55Updated 2 years ago
• Zubax / gridsens_gs2
  Zubax GNSS module
  ☆56Updated last year
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆39Updated 2 years ago
• sparkfun / SparkFun_Ublox_Arduino_Library
  Library to control UBX binary protocol and NMEA over I2C on Ublox GPS modules
  ☆146Updated 4 years ago
• Mictronics / pluto-gps-sim-win32
  PLUTO-GPS-SIM generates a GPS baseband signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADAL…
  ☆34Updated 6 years ago
• loginov-rocks / UbxGps
  Arduino library for the fastest and simplest communication with u-blox GPS modules
  ☆148Updated last year
• tridge / pyUblox
  python Ublox module
  ☆105Updated 2 years ago
• hcwinsemius / RTK_GNSS
  Manual for RTK GNSS with low cost u-blox ZED-F9P receivers rover-base setup
  ☆61Updated last year
• jeanlemotan / esp32_bridge_broadcast
  A SPI to ESP32 broadcast (rfmon) firmware.
  ☆38Updated 6 years ago
• roice / ntripcaster
  Modified from ntripcaster 0.1.5, Fixed the socket length compiling error.
  ☆26Updated 10 years ago
• bolderflight / ublox
  Arduino and CMake library for communicating with uBlox GPS receivers.
  ☆110Updated last year
• amungo / nut2nt
  NUT2NT+ hardware and gateware sources
  ☆25Updated 5 years ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆37Updated 5 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆95Updated 6 years ago