iliasam / Laser_tape_reverse_engineering
Alternative firmware for a cheap X-40 laser tape measure
☆127Updated 6 months ago
Alternatives and similar repositories for Laser_tape_reverse_engineering:
Users that are interested in Laser_tape_reverse_engineering are comparing it to the libraries listed below
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆88Updated 4 years ago
- OpenBLDC Strip (STM32F103)☆65Updated 8 years ago
- OpenSource Brushless Drive Controller☆110Updated 12 years ago
- OpenSource Brushless Drive Controller - The official repository is at http://github.com/open-bldc/open-bldc☆109Updated 12 years ago
- grbl for stm32 with nucleo stepper drivers☆36Updated 9 years ago
- Serial bootloader for STM8 microcontrollers☆96Updated 3 weeks ago
- Utility for encrypting/decrypting ST-Link firmware images☆115Updated 8 years ago
- Open-Source Oscilloscope based on STM32F3-DISCOVERY board☆34Updated 3 years ago
- Программная реализация USB на STM8S103☆100Updated 8 years ago
- An open source firmware design for DSLogic☆93Updated 10 years ago
- OpenSource Brushless Drive Controller Hardware☆133Updated 12 years ago
- Main Probe Scope PCB Repo☆56Updated 5 years ago
- A clone of the ST-Link V2.1 with the VCP+MSD+SWO features available.☆70Updated 3 years ago
- Compact isolated version of J-Link v9.☆122Updated 3 years ago
- Firmware for 3 Phase BLDC controller☆41Updated 4 years ago
- Module for ONSEMI FUSB302-D (USB-C Controller) for PD negotiation using STM32 HAL☆16Updated 4 years ago
- DIY Electronic load for DCDC converter characterization☆51Updated 4 years ago
- ST-Link dumper firmware☆52Updated 11 months ago
- Closed Loop Motor Controller☆133Updated 4 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- Symbols, footprints and 3d models for use with Altium Designer☆48Updated last year
- PCB designs for Infinity ESC☆28Updated 4 years ago
- STM32 based CNC controller☆105Updated 10 years ago
- STM32F103 Dual CDC☆65Updated 12 years ago
- ARM ICE, JTAG, SWD☆139Updated 4 years ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆88Updated 2 years ago
- Smoothie for Version2 boards☆38Updated 4 years ago
- An open source, embedded, high performance g-code-parser and CNC milling controller. This is a port of GRBL 1.1 to STM32F10X target.☆79Updated 2 years ago
- 3-axis UART Stepper Hub for 20$ (STM32 Nucleo 64 & Arduino CNC Shield)☆76Updated 8 years ago
- This Yet Another Bootloader (YAB) is for STM32, STM32F103, STM32F407, STM32L433, STM32F723, STLINK-V3, STLINK-V3MINI, CMSIS-DAP.☆83Updated 4 years ago