satoshinm / pill_serialLinks
Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board ⛺
☆139Updated 5 years ago
Alternatives and similar repositories for pill_serial
Users that are interested in pill_serial are comparing it to the libraries listed below
Sorting:
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆142Updated 2 years ago
- 1kByte USB DFU Bootloader for SAMD11 / SAMD21☆99Updated last year
- Simple stand-alone debugger for AVR DebugWIRE chips connected directly to an FT232R/CH340/DigiSpark/LittleWire on Linux or Windows.☆205Updated 3 years ago
- Alternative Logic16 Firmware☆37Updated 10 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆90Updated 4 years ago
- Tiny peripheral library for STM8 microcontrolles☆125Updated 3 years ago
- This is the fast avr programmer for AVR MCUs based on cheap stm32f103c8t6 board with usb-to-serial support.☆103Updated 2 months ago
- a Python utility for programming various Microchip MCU devices using Microchip CMSIS-DAP based debuggers☆118Updated 6 months ago
- esp32 wifi debugger for ARM Cortex microcontrollers https://github.com/blacksphere/blackmagic☆100Updated 6 months ago
- JTAG Versaloon firmware for the STM32 Bluepill board☆143Updated 3 years ago
- Python UPDI driver for programming "new" tinyAVR and megaAVR devices☆224Updated 4 years ago
- Free and open implementation of the CMSIS-DAP debugger firmware☆307Updated last year
- ESP32 IDF component for SWD communication☆68Updated 4 years ago
- USB to 3 Port Serial (UART) adapter firmware for STM32 Blue Pill.☆362Updated 2 years ago
- Embedded implementation of the SWD interface☆87Updated 5 years ago
- Blackmagic Wireless SWD Debug probe hosted on esp-idf SDK (for ESP8266) with UART on Telnet port and HTTP using xterm.js☆286Updated last year
- An Arduino-based debugWIRE hardware-debugger☆79Updated last week
- Serial bootloader for STM8 microcontrollers☆99Updated 8 months ago
- Flash firmware to STM32 microcontrollers using Python.☆121Updated last year
- Patch for STM8 Standard Peripherals Libraries☆95Updated last year
- PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…☆87Updated last year
- Example codes using sdcc to target STM8S MCUs.☆46Updated 5 years ago
- STM8S SPL for SDCC☆53Updated last year
- A purely software based USB peripheral for ARM Cortex M0+ devices☆114Updated 11 years ago
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆90Updated 2 years ago
- A clone of the ST-Link V2.1 with the VCP+MSD+SWO features available.☆71Updated 4 years ago
- MicroPython board definition for the MCUDev DevEBox STM32F407VGT6 board☆74Updated 4 years ago
- STM32F103 based minimalist oscilloscope.☆192Updated 7 years ago
- Easy PDK programmer for PADAUK microcontroller. EDA, schematic, gerber, bom, housing stl, firmware☆186Updated last year
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆166Updated 8 years ago