Alternatives and similar repositories for hexastorm

Users that are interested in hexastorm are comparing it to the libraries listed below

• sensille / litehm2
  LinuxCNC FPGA board port to LiteX
  ☆31Updated 10 months ago
• kadeturn / Micro-Stepper
  ☆39Updated 4 years ago
• Peter-van-Tol / LiteX-CNC
  Generic CNC firmware and driver for FPGA cards which are supported by LiteX
  ☆76Updated 2 months ago
• joshajohnson / iCE40-feather
  iCE40UP5K in an Adafruit Feather form factor
  ☆24Updated 3 years ago
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆63Updated 7 months ago
• diorcety / KiBlenderCad
  ☆31Updated 4 years ago
• multigcs / riocore
  riocore
  ☆65Updated this week
• fullyautomated / ferret
  Fully Automated line of USB-C PD PPS boards
  ☆19Updated 5 years ago
• machinekit / mksocfpga
  Hostmot2 FPGA code for SoC/FPGA platforms from Altera and Xilinx
  ☆32Updated 2 years ago
• fasaxc / pico-bldc
  RP2040-based BLDC motor controller
  ☆43Updated last year
• multigcs / LinuxCNC-RIO
  RealtimeIO for LinuxCNC based on an FPGA
  ☆80Updated last year
• esden / KiBus
  KiCad bus length matching script.
  ☆30Updated last year
• cinderblock / 3-Phase-Controller
  Firmware for 3 Phase BLDC controller
  ☆41Updated 5 years ago
• marcoreps / laser_driver
  Energy efficient constant current diode laser driver
  ☆49Updated 7 years ago
• Peter-van-Tol / LITEXCNC-HUB75HAT
  A PCB that turns the Colorlight 5A-75B into an easy to use LinuxCNC motion controller
  ☆14Updated last year
• kingoflolz / linear-actuator-hardware
  ☆65Updated 3 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 8 years ago
• sleepybishop / mojo_hostmot2
  hostmot2 firmware for the embedded micro mojo v3 fpga
  ☆11Updated 5 years ago
• Blinkinlabs / RaspberryPincushion
  ☆13Updated 4 years ago
• mhouse1 / mechsoftronic
  FPGA based CNC Machine
  ☆94Updated 6 years ago
• msvisser / panelize-plugin
  Automatic KiCad panelization plugin
  ☆56Updated 3 years ago
• Steffen-W / KiCad-Parasitics
  KiCad plugin to determine the parasitic properties of the printed tracks in the PCB layout.
  ☆47Updated 5 months ago
• cooked / kimotor
  KiCad plugin for the design of parametric PCB motors
  ☆82Updated last year
• kingoflolz / linear-actuator-firmware
  ☆31Updated 3 years ago
• intelligent-agent / redeem
  Firmware for Replicape
  ☆36Updated 3 years ago
• azonenberg / staticnet
  C++ TCP/IP and SSH stack with bounded run time and no dynamic memory allocations
  ☆41Updated 4 months ago
• PCB-Arts / vaporphase_x
  Firmware source code for Vapor Phase X
  ☆70Updated last month
• gregdavill / boson-sd-hardware
  Simple but Small Frame Grabber
  ☆38Updated 4 years ago
• LinuxCNC / hostmot2-firmware
  HostMot2 FPGA firmware
  ☆22Updated 4 years ago
• sequoia-hope / open_linear_motor
  Design files for a brushless linear motor project I worked on mostly from 2010-2012
  ☆28Updated 4 years ago