Alternatives and similar repositories for r4850g2_arduino:

Users that are interested in r4850g2_arduino are comparing it to the libraries listed below

• mb-software / esphome-huawei-r4850
  EspHome Component to control a huawei r4850 power supply via CAN bus
  ☆24Updated 6 months ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆63Updated last year
• BotoX / huawei-r48xx-esp32
  Control Huawei R4830G2 / R4850G2 over CAN with ESP32
  ☆45Updated 4 years ago
• KlausLi / Esp-HuaweiR4850-Controller
  Esp-HuaweiR4850-Controller Das Huawei R4850G2 Recitfier Modul ist ein 3000Watt Lade Netzteil. Es kann über Datenkommunikation gesteuert w…
  ☆60Updated 9 months ago
• taHC81 / Eltek-Flatpack2-ESPhome
  Monitor and configure Eltek Flaptak2 PSU using ESPhome
  ☆14Updated 10 months ago
• the6p4c / Flatpack2
  Software, hardware and protocol information for the Eltek Flatpack2.
  ☆47Updated 6 years ago
• PurpleAlien / R48_Rectifier
  CAN control of an Emerson/Vertiv R48 Rectifier
  ☆17Updated 2 months ago
• mjpalmowski / CAN-BUS-control-R4875G1-with-ESPHome-and-MQTT
  Control one or more R4875G1 R4875G5 R4830G2 R4850G2 R4850S1 and adjust Current and Voltage Parameters on HUAWAI R4875G Battery-Charger vi…
  ☆12Updated last week
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆74Updated 4 months ago
• NismoBoy34 / Esp32LeafInverterBridge
  esp32 Based can-bridge with webserver
  ☆16Updated last year
• gropi75 / SEM32
  SEM32 (Solar Energy Manager 32) based on ESP32 for Soyosource Inverter, Huawei r4850g2 power supply and 48V battery
  ☆12Updated 11 months ago
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆33Updated 2 years ago
• Xinyuan-LilyGO / T-CAN485
  ☆114Updated 6 months ago
• DanyEarth / TC-Charger-CAN-controller
  The source code for the CAN controller for TC chargers can be found here, as well as the correct library for the MCP chip which works str…
  ☆12Updated 5 years ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆100Updated 5 months ago
• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆15Updated 4 months ago
• playersz28 / JBD-ESP32
  ESP32 interface for JBD BMS
  ☆12Updated 2 years ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆32Updated last year
• SimonRafferty / Webasto-Heater---Replacement-Controller
  An Arduino M0 based controller for Webasto C/E Diesel Water Heaters
  ☆50Updated last month
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆31Updated last year
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆21Updated 4 months ago
• meteosat007 / solar-pylontech
  How to connect to a Sofar HYD3600 Inveter and 2 Pylontech US3000 batteries
  ☆19Updated 4 years ago
• jsphuebner / esp-egycounter
  ☆16Updated 3 months ago
• jsphuebner / esp32-web-interface
  ☆15Updated this week
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆160Updated last week
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆49Updated 10 months ago
• maland16 / daly-bms-uart
  Arduino library for communicating with Daly BMSs over UART
  ☆100Updated last year
• byrek / arduino-cj125
  Arduino CJ125 library for O2 sensor
  ☆12Updated last year
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆73Updated last year
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆117Updated last week