Alternatives and similar repositories for SmartShuntINA226:

Users that are interested in SmartShuntINA226 are comparing it to the libraries listed below

• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆163Updated this week
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆83Updated this week
• softwarecrash / Victron2MQTT
  Little Program for ESP82XX to get the Victron data to web and MQTT
  ☆71Updated this week
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆145Updated this week
• LHardwick-git / Victron-Service
  Temperature and Humidity d-bus services for Victron GX
  ☆19Updated 2 years ago
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆128Updated 3 years ago
• KinDR007 / Victron-MPPT-ve.direct-to-MQTT
  Read data from victron mppt and transport to mqtt server
  ☆42Updated 2 years ago
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆44Updated last year
• syssi / esphome-virtual-can-bms
  ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus
  ☆15Updated this week
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆105Updated 8 months ago
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆60Updated 11 months ago
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆55Updated this week
• KlausLi / Esp-Epever-Controller
  EspEpeverController mit Webseite, Der Esp8266 ist über ein Rs485 Modul mit dem Epever Solar Laderegler verbunden und kann diesen die verf…
  ☆44Updated last year
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆88Updated this week
• shining-man / bsc_hw
  Hardware battery safety controller (BSC)
  ☆28Updated last year
• softwarecrash / EPEver2MQTT
  ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT
  ☆53Updated this week
• KlausLi / Esp-Soyosource-Controller
  Der Esp8266 ist über ein Rs485 Modul mit dem Soyosource 1200 verbunden und kann diesem die Leistungswerte senden. ManualMode: Der Leistun…
  ☆158Updated last year
• victronenergy / gui-v2
  ☆42Updated this week
• hidaba / PylontechMonitoring
  Adding WiFi monitoring to US2000B , US2000C , US5000 batteries.
  ☆23Updated 3 weeks ago
• syssi / esphome-solax-x1-mini
  ESPHome component to monitor a Solax X1 mini via RS485
  ☆39Updated this week
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆124Updated last week
• bagges / deye-esp32-bridge
  ☆50Updated last month
• pvtex / Victron_BlueSmart_IP22
  Victron BlueSmart IP22 Charger ve.direct interface
  ☆25Updated last year
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆34Updated 2 years ago
• freakent / dbus-mqtt-devices
  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt
  ☆134Updated 2 weeks ago
• pmcg31 / esp32_victron_test
  Contains an Arduino project for Espressif ESP32 that will run a web server with web sockets to display data from a Victron MPPT charge co…
  ☆26Updated 4 years ago
• tgalarneau / bms
  JBD BMS and Thornwave bluetooth data monitoring
  ☆44Updated 3 years ago
• Sleeper85 / esphome-jk-bms-can
  ☆100Updated 6 months ago
• Telekatz / venus.dbus-shellyPlug
  Integrate Shelly single phase energy meters into Victron Energies Venus OS
  ☆21Updated 2 weeks ago
• victronenergy / dbus-flashmq
  Plugin for FlashMQ that interfaces between DBUS and MQTT.
  ☆50Updated last month