Alternatives and similar repositories for R48_Rectifier

Users that are interested in R48_Rectifier are comparing it to the libraries listed below

• haklein / r4850g2_arduino
  Huawei R4850G2 rectifier CAN bus control via Arduino
  ☆24Updated 7 months ago
• craigpeacock / Huawei_R4850G2_CAN
  Example code to communicate with Huawei R4850G2 Power Supply via CAN
  ☆75Updated last year
• BotoX / huawei-r48xx-esp32
  Control Huawei R4830G2 / R4850G2 over CAN with ESP32
  ☆54Updated 5 years ago
• taHC81 / Eltek-Flatpack2-ESPhome
  Monitor and configure Eltek Flaptak2 PSU using ESPhome
  ☆18Updated last year
• mb-software / esphome-huawei-r4850
  EspHome Component to control a huawei r4850 power supply via CAN bus
  ☆28Updated this week
• mjpalmowski / CAN-BUS-control-R4875G1-with-ESPHome-and-MQTT
  Control one or more R4875G1 R4875G5 R4830G2 R4850G2 R4850S1 and adjust Current and Voltage Parameters on HUAWAI R4875G Battery-Charger vi…
  ☆37Updated last month
• the6p4c / Flatpack2
  Software, hardware and protocol information for the Eltek Flatpack2.
  ☆49Updated 6 years ago
• kscholty / SmartShuntINA226
  ☆36Updated last year
• KlausLi / Esp-HuaweiR4850-Controller
  Esp-HuaweiR4850-Controller Das Huawei R4850G2 Recitfier Modul ist ein 3000Watt Lade Netzteil. Es kann über Datenkommunikation gesteuert w…
  ☆70Updated last year
• Sleeper85 / esphome-yambms
  Yet another multi-BMS Merging Solution
  ☆137Updated 3 weeks ago
• sshoecraft / jbdtool
  JBD BMS Linux utility
  ☆68Updated 4 months ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆183Updated 2 weeks ago
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆39Updated 2 years ago
• SimonRafferty / Webasto-Heater---Replacement-Controller
  An Arduino M0 based controller for Webasto C/E Diesel Water Heaters
  ☆57Updated 9 months ago
• NEEY-electronic / JK
  ☆64Updated 3 years ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆91Updated 6 months ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆115Updated last year
• stuartpittaway / diyBMSv4ESP32
  diyBMS v4 code for the ESP32 and new controller hardware
  ☆216Updated 5 months ago
• stuartpittaway / diyBMSv4Leaf
  diy BMS version 4 for Nissan Leaf cells
  ☆20Updated 4 years ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆45Updated 4 years ago
• maland16 / daly-bms-uart
  Arduino library for communicating with Daly BMSs over UART
  ☆112Updated last year
• Sleeper85 / esphome-jk-bms-can
  ☆103Updated 11 months ago
• leodesigner / esphome-emerson-vertiv-r48
  Esphome custom component to control Emerson / Vertiv R48 PSU
  ☆14Updated 9 months ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆80Updated 2 years ago
• rakhmaevao / JbdBms
  Library for working with JBD BMS
  ☆75Updated last year
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆192Updated last year
• leodesigner / powmr_comm
  PowMr Inverter serial communication protocol reverse engineering
  ☆85Updated 2 years ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆13Updated last month
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆175Updated 2 months ago
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆202Updated last week