Alternatives and similar repositories for JK

Users that are interested in JK are comparing it to the libraries listed below

• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆188Updated 10 months ago
• Sleeper85 / esphome-jk-bms-can
  ☆102Updated 8 months ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆164Updated last week
• Sleeper85 / esphome-yambms
  Yet another multi-BMS Merging Solution
  ☆109Updated last week
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆172Updated 2 months ago
• txubelaxu / esphome-jk-bms
  ESPHome components to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE. Monitor multiple JK-PBx (hw v1…
  ☆56Updated 4 months ago
• Ackmaniac / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆17Updated 2 months ago
• maxx-ukoo / jk-bms2pylontech
  JK BMS to PYLON CANBUS Protocol converter
  ☆36Updated 2 years ago
• jblance / jkbms
  repo with attempts to test connectivity to JK-BMS via BLE
  ☆27Updated 2 years ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆79Updated last year
• fl4p / batmon-ha
  Add-on for Home Assistant to connect JK, JBD, Daly, ANT, SOK and Supervolt BMS via Bluetooth
  ☆401Updated 4 months ago
• syssi / esphome-jk-bms
  ESPHome component to monitor and control a Jikong Battery Management System (JK-BMS) via UART-TTL or BLE
  ☆709Updated last week
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆90Updated 2 weeks ago
• ArminJo / JK-BMSToPylontechCAN
  Converts the JK-BMS RS485 data to Pylontech CAN data
  ☆87Updated 3 months ago
• PurpleAlien / jk-bms_grafana
  Read data from a JK BMS and graph it in Grafana
  ☆56Updated 6 months ago
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆147Updated 2 years ago
• byte4geek / SEPLOS_MQTT
  Read data From Seplos BMS and send them to the Home Assistant
  ☆45Updated last year
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆33Updated last year
• shining-man / bsc_fw
  Firmware battery safety controller (BSC)
  ☆126Updated 2 weeks ago
• juamiso / PYLON_EMU
  Python script to emulate the outgoing CAN bus traffic from a Pylontech LFP battery pack (48V)
  ☆44Updated 4 years ago
• syssi / esphome-pace-bms
  ESPHome component to monitor and control a PACE Battery Management System (PACE-BMS) via RS485 (Modbus)
  ☆59Updated 2 weeks ago
• kscholty / SmartShuntINA226
  ☆33Updated last year
• ai-republic / bms-to-inverter
  Use, monitor and control any battery brand with any inverter! Application to read and monitor data from BMSes and write data to an invert…
  ☆179Updated last month
• softwarecrash / Solar2MQTT
  ESP8266 based WiFi and MQTT interface for MPPT Inverters that use watchpower
  ☆246Updated last month
• syssi / esphome-pipsolar
  ESPHome component to monitor and control a pipsolar inverter via RS232
  ☆127Updated 2 weeks ago
• jblance / mpp-solar
  Python package to communicate to MPP Solar PIP-4048MS inverters (and similar)
  ☆398Updated last month
• Louisvdw / dbus-serialbattery
  Battery Monitor driver for serial battery in VenusOS GX systems
  ☆571Updated 4 months ago
• mr-manuel / venus-os_dbus-serialbattery
  Battery Monitor driver for serial battery in VenusOS GX systems
  ☆146Updated this week
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART, RS485 or BLE
  ☆98Updated this week
• dj-nitehawk / Hybrid-Inverter-Monitor
  Monitoring application for hybrid inverters using the Voltronic communication protocol & JK BMS via USB port.
  ☆95Updated 7 months ago