gonium / gosdm630Links
An interface for the Eastron SDM/Modbus smart meter series.
☆73Updated 6 years ago
Alternatives and similar repositories for gosdm630
Users that are interested in gosdm630 are comparing it to the libraries listed below
Sorting:
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- A KNX/IP library for the ESP8266 with Arduino☆144Updated 3 years ago
- sdm120c ModBus Mini Smart Meter☆73Updated 4 years ago
- MQTT 433.92 MHz radio-frequency device gateway☆137Updated 2 years ago
- A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)☆93Updated last year
- ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)☆145Updated 4 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆258Updated last year
- Communicate with Viessmann boilers using the optolink for ESP8266 and ESP32☆130Updated 3 months ago
- Device to measure energy and temperature☆80Updated 6 years ago
- Alternative Firmware for 'ESP8266, ESP8285 and ESP32 based devices' like Itead Sonoff, Shelly or NodeMCU, with Web, Timers, OTA, MQTT, KN…☆47Updated last year
- Itead Studio SonoffSC custom firmware with MQTT and Domoticz support☆104Updated 6 years ago
- Xiaomi Zigbee to MQTT bridge using zigbee-shepherd☆99Updated 7 years ago
- Modbus RTU to MQTT Gateway☆94Updated last month
- My personal Workspace for Mysensors HW☆35Updated 5 years ago
- ESP8266-ESP12e Wifi Doppel Relay IOT Unterputz Montage möglich / Schaltaktor☆142Updated 7 years ago
- Alternative culfw☆128Updated 2 years ago
- A class to collect data from a energy monitor that uses modbus protocol.☆47Updated 5 years ago
- ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters☆266Updated last month
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆130Updated 4 years ago
- Plugin for a rapid development of battery-powered sensors☆132Updated 2 years ago
- Open-source firmware for STM32 co-processor on the Shelly Dimmer.☆55Updated 2 years ago
- ☆15Updated 8 years ago
- Custom Board to control RGB + WW channels via Wifi utziling ESP8266☆45Updated 8 years ago
- Simple Gui to create simple knxprod file for ETS.☆60Updated 3 years ago
- Modbus TCP <-> MQTT glue. YAML configuration. Robust.☆87Updated last year
- TI CC2652R w/ USB-UART in the ubiquitous "stick" form factor☆83Updated 4 years ago
- Modbus proxy for SolarEdge inverters and unsupported kWh meters☆35Updated last year
- Use KNX just like the mqtt nodes☆20Updated 6 years ago
- RFLink for ESP, with MQTT client☆74Updated 2 years ago
- Custom SW for the OBI "Wifi Stecker Schuko"☆64Updated 6 years ago