Alternatives and similar repositories for mbmd:

Users that are interested in mbmd are comparing it to the libraries listed below

• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆83Updated 11 months ago
• nmakel / solaredge_modbus
  SolarEdge Modbus data collection library
  ☆154Updated 4 months ago
• mbs38 / spicierModbus2mqtt
  Modbus master which publishes via MQTT
  ☆64Updated 2 months ago
• tobiasfaust / SolaxModbusGateway
  Modbus RTU to MQTT Gateway
  ☆86Updated last week
• OpenKNX / OpenKNX
  OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts
  ☆75Updated last week
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆74Updated 5 years ago
• Supergiovane / node-red-contrib-knx-ultimate
  Control your KNX intallation via Node-Red! A bunch of KNX nodes, with integrated Philips HUE control and ETS group address importer.
  ☆161Updated this week
• enbility / eebus-go
  EEBUS protocol implementation in go
  ☆77Updated 3 weeks ago
• XKNX / xknxproject
  ETS project parser written in python
  ☆96Updated last week
• victronenergy / dbus-mqtt
  Venus OS service mapping the D-Bus on Venus OS to MQTT
  ☆114Updated 11 months ago
• thelsing / knx
  knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS
  ☆299Updated last month
• steff393 / hgdo
  Hörmann Garage Door Opener mit ESP8266 (direkt über Bus, ohne UAP1 !)
  ☆45Updated 3 years ago
• tiagocoutinho / modbus-proxy
  Connect multiple clients to modbus devices
  ☆89Updated 2 months ago
• mruettgers / SMLReader
  ESP8266 based smart meter (SML) to MQTT gateway
  ☆306Updated 2 years ago
• emsesp / EMS-ESP
  ESP8266 firmware to read and control EMS and Heatronic compatible equipment such as boilers, thermostats, solar modules, and heat pumps
  ☆312Updated 3 years ago
• basking-in-the-sun2000 / solar-logger
  A datalogger for a solar inverter. Stores data in influxdb and displays it in grafana. Has load diverting capability, to use the inverter…
  ☆104Updated 2 years ago
• nygma2004 / growatt2mqtt
  Growatt Solar Inverter Modbus Data to MQTT Gateway
  ☆157Updated last year
• Gifford47 / HCPBridgeMqtt
  Emulates Hörmann UAP1-HCP board using an ESP32 and a RS485 converter, and exposes garage door controls over web page and MQTT.
  ☆97Updated last month
• goecharger / go-eCharger-API-v2
  New API specification for V3 and V4 go-eCharger
  ☆104Updated 3 months ago
• MSkjel / LocalPulse2Tibber
  ☆93Updated 2 years ago
• hkiam / HCPBridge
  emulates Hoermann HAP 1 HCP (HCP2) on ESP8622, ESP32 and Arduino.
  ☆96Updated 4 years ago
• CurtRod / SimpleEVSE-WiFi
  Brings EVSE WB/DIN into your WiFi
  ☆79Updated 2 years ago
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆188Updated last month
• freakent / dbus-mqtt-devices
  A driver for Victron VenusOS GX devices to support use of dbus-mqtt/flashmq-mqtt
  ☆134Updated 2 weeks ago
• envy / esp-knx-ip
  A KNX/IP library for the ESP8266 with Arduino
  ☆142Updated 3 years ago
• nmakel / solaredge_meterproxy
  Modbus proxy for SolarEdge inverters and unsupported kWh meters
  ☆33Updated last year
• Apollon77 / smartmeter-obis
  This library supports the reading and parsing of smartmeter protocols that follow the OBIS number logic to make their data available.
  ☆55Updated last year
• openv / vcontrold
  vcontrold Daemon for control and logging of Viessmann® type heating devices
  ☆112Updated 8 months ago
• Akulatraxas / ha-modbusproxy
  Hassio Addon packaging modus-proxy
  ☆52Updated last year
• datenschuft / SMA-EM
  SMA Energymeter measurement
  ☆98Updated 7 months ago