gonium / usb-iso-rs485Links
☆15Updated 8 years ago
Alternatives and similar repositories for usb-iso-rs485
Users that are interested in usb-iso-rs485 are comparing it to the libraries listed below
Sorting:
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆74Updated last year
- Read data from victron mppt and transport to mqtt server☆42Updated 3 years ago
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- Arduino Interface for cheap 2.4ghz RF enabled Solar Micro Inverters☆66Updated 2 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.☆67Updated 6 years ago
- An interface for the Eastron SDM/Modbus smart meter series.☆74Updated 6 years ago
- Our DMX light controller☆17Updated 9 years ago
- Manages Victrion VenusOs VeCan (aka CANbus) ports☆54Updated 9 months ago
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆69Updated 5 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆131Updated 4 years ago
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆32Updated 7 years ago
- Contains an Arduino project for Espressif ESP32 that will run a web server with web sockets to display data from a Victron MPPT charge co…☆28Updated 5 years ago
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆64Updated 4 months ago
- Device to measure energy and temperature☆81Updated 6 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆258Updated last year
- M-Bus --> MQTT-Gateway with shields for ESPs☆75Updated last week
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆178Updated 4 months ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆95Updated last month
- Hardware battery safety controller (BSC)☆29Updated last year
- ESP-12(E/F) based controller for WLED or other neopixel things☆41Updated last year
- ☆30Updated 3 years ago
- ☆104Updated last year
- PCB to connect a TTL reader either to an FTDI or ESP12-E/F (WiFi)☆25Updated last year
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆46Updated 2 years ago
- Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy☆117Updated last year
- My personal Workspace for Mysensors HW☆35Updated 5 years ago
- Brings EVSE WB/DIN into your WiFi☆83Updated 3 years ago
- M-Bus gateway with web server based on ESP8266 NodeMCU☆28Updated 9 months ago
- JBD BMS Linux utility☆70Updated 7 months ago
- IR blaster shield for WeMos D1 Mini with HTTP and MySensors support☆41Updated 6 months ago