thelsing / CreateKnxProdLinks
Simple Gui to create simple knxprod file for ETS.
☆60Updated 3 years ago
Alternatives and similar repositories for CreateKnxProd
Users that are interested in CreateKnxProd are comparing it to the libraries listed below
Sorting:
- Create your own KnxProd Files with UI.☆93Updated 2 months ago
- A KNX/IP library for the ESP8266 with Arduino☆148Updated 4 years ago
- knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS☆331Updated 3 months ago
- Allow to turn your Arduino into a self-made KNX device using the hardware TPUART interface☆147Updated 3 years ago
- Linknx is a service aimed at interacting with KNX devices. It features a value cache to save bus bandwidth and exposes a rules engine all…☆51Updated 6 months ago
- This is the library of the KNX-User-Forum Arduino project initiated by thorsten Gehrig☆58Updated 8 months ago
- demonstrates how to read bytes from stknx chip☆23Updated 5 years ago
- Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…☆199Updated 10 months ago
- Reusable logic module for OpenKNX☆10Updated 2 weeks ago
- Use KNX just like the mqtt nodes☆20Updated 6 years ago
- KNX Tunneling for ESP32☆10Updated 7 years ago
- Modbus TCP <-> MQTT glue. YAML configuration. Robust.☆92Updated last month
- A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)☆94Updated last year
- Source to build an own .knxprod sign-tool☆13Updated 10 years ago
- Inbetriebnahmesoftware für KNX Geräte☆25Updated 3 years ago
- Modbus RTU to MQTT Gateway☆99Updated last month
- OpenSource KNX software and hardware for maker, hobbyist and home automation enthusiasts☆88Updated last month
- An interface for the Eastron SDM/Modbus smart meter series.☆74Updated 6 years ago
- KNXnet/IP server for KNX IP, KNX (RF) USB, FT1.2, and TP-UART☆71Updated last month
- Alternative Firmware for 'ESP8266, ESP8285 and ESP32 based devices' like Itead Sonoff, Shelly or NodeMCU, with Web, Timers, OTA, MQTT, KN…☆48Updated last year
- ESP32 Modbus RTU/TCP Gateway☆223Updated last year
- ☆40Updated 2 months ago
- ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters☆276Updated last week
- PlatformIO: implements a knx-sensor firmware for a SAMD21 board☆11Updated 3 years ago
- Modbus master which publishes via MQTT☆68Updated 6 months ago
- knx stack (TP, IP and RF) for arduino and linux, Can be configured with ETS☆29Updated last week
- BAOS SDK - http://weinzierl-engineering.github.io/baos☆44Updated 3 years ago
- Gateway between KNX bus interfaces and MQTT☆49Updated 10 years ago
- This library supports the reading and parsing of smartmeter protocols that follow the OBIS number logic to make their data available.☆56Updated last month
- Library for controlling DALI lighting systems☆197Updated 3 weeks ago