Alternatives and similar repositories for esp8266-gardena1251

Users that are interested in esp8266-gardena1251 are comparing it to the libraries listed below

• apreb / eNode
  Device to measure energy and temperature
  ☆80Updated 6 years ago
• couin3 / RFLink
  RFLink for ESP, with MQTT client
  ☆74Updated 2 years ago
• puuu / MQTT433gateway
  MQTT 433.92 MHz radio-frequency device gateway
  ☆137Updated 2 years ago
• letscontrolit / ESPEasyPluginPlayground
  Plugin ideas, concepts, user contributed, etc
  ☆192Updated last year
• Stef-aap / RFLink-ESP
  Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32
  ☆111Updated 4 years ago
• plapointe6 / HAMqttDevice
  A library that provides tools to simplify MQTT discovery implementation for Home Assistant to your device.
  ☆48Updated last year
• scalz / MySensors-HW
  My personal Workspace for Mysensors HW
  ☆35Updated 5 years ago
• voltlog / Valve-Actuator
  ☆100Updated last year
• brandond / esphome-tuya_pir
  ESPHome support for cheap WiFi PIR sensors
  ☆66Updated 4 years ago
• reaper7 / SDM_Energy_Meter
  reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)
  ☆258Updated last year
• jomjol / water-meter-picture-provider
  ☆44Updated 3 years ago
• xoseperez / sonoffsc
  Itead Studio SonoffSC custom firmware with MQTT and Domoticz support
  ☆104Updated 6 years ago
• Spilota / Openhab-Irrigation
  Irrigation controller using Openhab and the ESP8266 module
  ☆22Updated 9 years ago
• physee / Victron.Arduino-ESP8266
  Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…
  ☆130Updated 4 years ago
• piotrC4 / mqtt-ir-transceiver
  ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)
  ☆145Updated 4 years ago
• marvinroger / arduino-shutters
  Arduino library to control non-smart roller shutters using time
  ☆61Updated 5 years ago
• jkairys / growatt-esp8266
  Growatt Inverter monitoring via MQTT using ESP8266 modbus interface
  ☆67Updated 5 years ago
• bbqkees / Nefit-Buderus-EMS-bus-Arduino-Domoticz
  Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino
  ☆90Updated 4 years ago
• openenergymonitor / EmonESP
  ESP8266 WIFI serial to emoncms link
  ☆166Updated last year
• JacekDob / Sonoff-Tasmota
  Provide ESP32 with Web, MQTT and OTA firmware using Arduino IDE or PlatformIO
  ☆71Updated 7 years ago
• mysensors / NodeManager
  Plugin for a rapid development of battery-powered sensors
  ☆132Updated 2 years ago
• chickey / RS485-WiFi-EPEver
  This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…
  ☆74Updated last year
• ToniA / Raw-IR-decoder-for-Arduino
  Take raw IR signal from a remote receiver and print out pulse lengths
  ☆77Updated 5 months ago
• Zepheus / ESP8266-rf-mqtt-bridge
  A MQTT to 433/315Mhz RF bridge build on the ESP8266 for home automation
  ☆56Updated 7 years ago
• piotrC4 / mqtt-rflink-bridge
  Homie based bridge between MQTT and RFlink module
  ☆22Updated 5 years ago
• Bettapro / Solar-Tracer-Blynk-V3
  Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .
  ☆56Updated 11 months ago
• puuu / ESPiLight
  ESPiLight - pilight 433.92 MHz protocols library for Arduino
  ☆119Updated 2 years ago
• softypit / esp32_mqtt_eq3
  esp32-based mqtt node to control EQ-3 BLE TRVs
  ☆145Updated 3 years ago
• Phileep / rflink-to-mqtt
  Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE
  ☆38Updated 7 years ago
• john30 / ebusd-esp
  Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)
  ☆157Updated last year