dev-lab / esp-iot-mbusLinks
M-Bus gateway with web server based on ESP8266 NodeMCU
☆26Updated 2 months ago
Alternatives and similar repositories for esp-iot-mbus
Users that are interested in esp-iot-mbus are comparing it to the libraries listed below
Sorting:
- M-Bus --> MQTT-Gateway with shields for ESPs☆45Updated this week
- This project is for connecting to EPEver charge controllers over WiFi for viewing running stats and also allows automatic posting of them…☆73Updated 10 months ago
- ESP82XX based connector for EPEver Solar tracker systems, control and watch Multiple devices over webinterface and MQTT☆58Updated last week
- Hardware battery safety controller (BSC)☆29Updated last year
- Growatt Inverter monitoring via MQTT using ESP8266 modbus interface☆68Updated 5 years ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆54Updated 9 months ago
- ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter☆89Updated this week
- Device to measure energy and temperature☆80Updated 6 years ago
- ESPHome component to monitor a Solax X1 mini via RS485☆39Updated this week
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆32Updated 6 years ago
- Tasmota unofficial firmware builds. Install via Tasmota WebInstaller☆108Updated this week
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆109Updated 3 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆129Updated 3 years ago
- An ESPHOME custom component to control DMX-512 devices via UART + RS485 module☆56Updated this week
- Bresser 5-in-1/6-in-1/7-in-1 868 MHz Weather Sensor Radio Receiver for Arduino based on CC1101, SX1276/RFM95W, SX1262 or LR1121☆144Updated this week
- Read data from victron mppt and transport to mqtt server☆42Updated 2 years ago
- ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems☆172Updated 2 months ago
- A very flexible ESP32 power meter / energy meter with SCT-013-0x0, ZMPT101B, ACS712 sensors☆43Updated last year
- A library that provides tools to simplify MQTT discovery implementation for Home Assistant to your device.☆47Updated 9 months ago
- OpenTherm library to create thermostat for OpenTherm enabled boilers and HVACs using an OpenTherm controller and an ESP32 or other microc…☆70Updated 2 years ago
- ESPHome component to emulate a SMA/Victron compatible BMS via CAN bus☆16Updated this week
- ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE☆160Updated this week
- ESPHome Modbus Server component☆45Updated last year
- Little Program for ESP82XX to get the Victron data to web and MQTT☆81Updated last week
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- ☆101Updated last year
- Microcontroller program to connect to soyosource grid tie inverter RS485 limiter connection and provide it with a demand signal based on …☆14Updated 3 years ago
- Converts the JK-BMS RS485 data to Pylontech CAN data☆84Updated 3 months ago
- Firmware for ESP8266 allowing eBUS communication for ebusd (https://github.com/john30/ebusd)☆155Updated last year
- Modbus RTU to MQTT Gateway☆90Updated 2 weeks ago