custom-build-robots / 6-Axis-Desktop-Robotic-Arm-Raspberry-Pi

Related projects ⓘ

Alternatives and complementary repositories for 6-Axis-Desktop-Robotic-Arm-Raspberry-Pi

• wedesoft / arduino-sainsmart
  Arduino software to control SainsSmart 6-axis palletizing robot arm
  ☆73Updated 3 years ago
• Roboteurs / rbx1-software
  Software to drive a 3D printed robot with a SlushEngine or other motor controller driver
  ☆28Updated 7 years ago
• NiryoRobotics / niryo_stepper
  ☆48Updated 6 years ago
• NiryoRobotics / niryo_one_industrial_demonstrators
  Industrial Demonstrators to build with your Niryo One robot(s)
  ☆19Updated 3 years ago
• glumb / mrc
  MicroPede robot controller 🤖🖥👾
  ☆96Updated 5 years ago
• Chris-Annin / Annin-Robot-Project
  6 axis stepper motor robot
  ☆104Updated 6 years ago
• steinhdan / dog1
  Quadruped using servos and computer vision for navigation
  ☆59Updated 5 years ago
• bikerglen / robot-arm-v01
  ☆55Updated 7 years ago
• Chris-Annin / ROS_AR2_moveit_config
  ROS moveit config files for the AR2 robot
  ☆14Updated 6 years ago
• hyansuper / spotmicro
  ☆25Updated 5 years ago
• miguelasd688 / Quadruped-dog-like-robot
  DIY project of a quadruped robot as a exercise for programming.
  ☆21Updated 4 years ago
• MyRobotLab / InMoov
  inmoov repo
  ☆94Updated 3 years ago
• isaac879 / Delta-Robot
  This repository is for my 3D printed delta robot controlled by an Arduino Nano.
  ☆42Updated 5 years ago
• open-dynamic-robot-initiative / master-board
  Hardware and Firmware of the Solo Quadruped Master Board
  ☆120Updated last month
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆77Updated 8 months ago
• implementedrobotics / Nomad
  12-DOF Quadruped Robot
  ☆33Updated 2 years ago
• LuSeKa / HoverBot
  Self-balancing robot using hoverboard hub motors
  ☆108Updated 2 years ago
• francisc0garcia / braccio_camai
  Low-cost robot arm powered by computer vision and artificial intelligence
  ☆40Updated 4 years ago
• mjbots / mjmech
  ☆71Updated 4 years ago
• AliShug / EvoArm
  An open-source 3D-printable robotic arm
  ☆139Updated 5 years ago
• Juulbl / 6AxisRoboticArm
  6 axis robotic arm using a PWM driver, servos and an Arduino
  ☆21Updated 5 years ago
• XRobots / SonicRobot
  ☆26Updated 2 years ago
• zlingkang / quadruped_9g
  A ROS node that describes a quadruped robot using URDF
  ☆80Updated 6 years ago
• linorobot / kinematics
  Arduino Kinematics library for differential drive(2WD, 4WD) and mecanum drive robots.
  ☆65Updated 5 years ago
• craftit / Dogbot
  Robotic quadruped
  ☆43Updated 6 years ago
• andresaraque / centauri6dof
  Manipulator robot based on BCN3DMOVEO with 6 degree of freedom (DOF) and user interface (GUI)
  ☆57Updated 3 years ago
• ReactRobotics / DogBotV4
  ☆33Updated 5 years ago
• ftobler / robotArm
  Software for a 3D Printed Robot Arm
  ☆123Updated 4 years ago
• NandhaKishorM / AI-Quadruped-Robot-For-Agriculture
  ☆19Updated 3 years ago
• NiryoRobotics / niryo_one_ros
  Niryo One ROS stack
  ☆239Updated last year