bitcraze / crazyflie2-ios-clientLinks
The Crazyflie 2.0 iOS client
☆37Updated 3 months ago
Alternatives and similar repositories for crazyflie2-ios-client
Users that are interested in crazyflie2-ios-client are comparing it to the libraries listed below
Sorting:
- Crazyflie 2.0 nRF51 Bootloader☆11Updated 9 months ago
- Crazyflie 2.0 nRF51 firmware☆66Updated 4 months ago
- Mechanical models of the Crazyflie and other parts.☆58Updated 7 months ago
- Datasheets and KiCad project files for the Crazyflie electronics design.☆60Updated 9 years ago
- This is the Arduino version of the code for my balancing robot/segway☆77Updated 12 years ago
- raspilot hardware☆18Updated 9 years ago
- Crazyflie 2.0 STM32F4 bootloader☆43Updated 2 years ago
- An android ground controller (and other things) for Mavlink/Arduplane☆144Updated 7 years ago
- A simple mavlink example for arduino☆53Updated 8 years ago
- KiCad project for the Crazyflie 2.0 expansion template☆35Updated 3 years ago
- Neato XV-11 LIDAR connected to an STM32F429IDISCOVERY board for 360-degree range scanning and measurement☆41Updated 10 years ago
- Release repository for binaries☆40Updated 3 months ago
- Open Source 3 Axis Board Design files☆90Updated 11 years ago
- Paparazzi UAV hardware☆149Updated 8 years ago
- An autopilot for Linux-based computers based on the BeagleBone (Black)☆109Updated 8 years ago
- BeagleBoard.org BeagleBone Blue - BeagleBone optimized for mobile robotics☆163Updated 4 years ago
- Example code for the ADNS-3080 optical flow sensor☆53Updated 2 years ago
- Datasheets and KiCad project files for the Crazyradio electronics design.☆30Updated 9 years ago
- Emlid's port of ArduPilot for Navio/Navio+/Navio2.☆65Updated 4 years ago
- Arduino projects for the OpenROV platform.☆52Updated 8 years ago
- ☆60Updated 8 years ago
- Arduino driver for PMW3901 optical flow sensor☆62Updated 2 years ago
- Git repository for the Balanduino balancing robot☆134Updated 3 years ago
- PPM Encoder board http://paparazzi.enac.fr/wiki/ATmega_PPM_Encoder_Board☆31Updated 13 years ago
- The Micro Python project☆56Updated last week
- The Crazyflie bootloader used for flashing firmware via the radio.☆30Updated 3 years ago
- The Bitcraze website☆19Updated last week
- Generate PPM signal using Arduino☆63Updated 9 years ago
- UAVCAN is a lightweight protocol designed for reliable communication in aerospace and robotic applications via CAN bus.☆36Updated 3 years ago
- Autonomous car using the OpenMV camera☆43Updated 5 years ago