Alternatives and similar repositories for lectronizer:

Users that are interested in lectronizer are comparing it to the libraries listed below

• mwelling / rp2040-pmod
  RP2040 MCU based PMOD
  ☆20Updated 2 months ago
• ArcaneNibble / wch-uf2
  CH32V UF2 bootloader
  ☆44Updated 6 months ago
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆38Updated 7 months ago
• Wren6991 / DVI-PMOD
  DVI PMOD adapter (HDMI connector)
  ☆28Updated 4 years ago
• gregdavill / CH32V003-makefile-example
  CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs
  ☆16Updated 2 years ago
• Wren6991 / SmolDVI
  Low-area DVI experiment for iCE40 UP5k and HX1k FPGAs
  ☆31Updated 3 years ago
• gregdavill / gsd-kicad-libs
  GsD style kicad Libraries
  ☆11Updated 4 years ago
• enjoy-digital / litex_rp2040_pmod_test
  Test of a RP2040 PMOD attached to a LiteX SoC.
  ☆25Updated last year
• exentio / koyomi-lvds-hat
  Raspberry Pi hat to test Vaio P displays
  ☆18Updated last month
• gregdavill / KiZip
  KiCad Plugin to package gerbers ready for ordering
  ☆36Updated 2 years ago
• steieio / pico-dirty-blaster
  Collection of Raspberry Pi Pico board adapters for use with Pico-DirtyJTAG
  ☆13Updated 8 months ago
• controlpaths / rp2040_pmod
  Repository for the rp2040_pmod board from controlpaths devices.
  ☆18Updated last year
• dst202 / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆28Updated last month
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆32Updated 4 years ago
• azonenberg / voltage-divider-calculator
  Tool for selecting voltage divider components given constraints and a list of available resistors
  ☆31Updated 2 years ago
• sfranzyshen / arduino-bl808
  Arduino Core for Bouffalo Labs's RISC-V BL808 SOC
  ☆35Updated last year
• VedantParanjape / KiBuzzard
  ☆19Updated 3 years ago
• tinyvision-ai-inc / UPduino-v2.1
  UPduino
  ☆26Updated 4 years ago
• aidanchandra / serial-plotter
  ☆16Updated last year
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆7Updated 2 years ago
• OLIMEX / RP2040-PICO-PC
  Mother board for Raspberry Pi RP2040-PICO which adds HDMI/DVI Audio SD-card Lipo charger UEEXT and USB-OTG allowing to make small PC with…
  ☆29Updated last year
• joshajohnson / iCE40-feather
  iCE40UP5K in an Adafruit Feather form factor
  ☆23Updated 2 years ago
• SYZYGYfpga / pcb-templates
  Template PCB's for SYZYGY board designs
  ☆20Updated 2 years ago
• machdyne / lowe
  Löwe FPGA Board
  ☆12Updated last year
• ulx3s / ulx3s.github.io
  community projects that can be used with the ULX3S FPGA ESP32 board
  ☆15Updated 2 months ago
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆28Updated 7 months ago
• ketszim97 / OpenScope_DigitalTest
  Digital Test board for an Open Source FPGA Oscilloscope
  ☆16Updated 4 years ago
• mattvenn / ws2812-core
  verilog core for ws2812 leds
  ☆32Updated 3 years ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆32Updated last year
• sitronlabs / Solder-Ninja-Pen-Hardware
  Enclosure and Circuit Board for the Solder Ninja Pen
  ☆34Updated 10 months ago