Alternatives and similar repositories for MicroCodeCompiler

Users that are interested in MicroCodeCompiler are comparing it to the libraries listed below

• Speccery / icy99
  TI-99/4A FPGA implementation for the Icestorm toolchain
  ☆17Updated 5 months ago
• rschlaikjer / fpga-3-softcores
  Example Risc-V SoC with VexRiscv, custom peripherals and bare metal firmware
  ☆12Updated 4 years ago
• jevinskie / General-Slow-DDR3-Interface
  A general slow DDR3 interface. Very little resource consumption. Suits for all FPGAs with 1.5V IO voltage.
  ☆12Updated 2 years ago
• verilog-indeed / nano4k_hdmi_tx
  Open-source HDMI/DVI transmitter for the Gowin GW1NSR-powered Tang Nano 4K
  ☆24Updated 2 years ago
• b-dmitry1 / BIOS
  Very compact (8KB) embedded x86 BIOS for FPGA/emulators/386EX
  ☆17Updated 3 years ago
• freecores / ps2
  PS2 interface
  ☆19Updated 7 years ago
• hdl-util / vga-text-mode
  VGA-compatible text mode functionality
  ☆17Updated 5 years ago
• qubeck78 / tangyRiscVSOC
  RiscV based SOC with 2D and 3D graphics acceleration for Tang Nano 20K
  ☆37Updated last year
• steieio / pico-dirty-blaster
  Collection of Raspberry Pi Pico board adapters for use with Pico-DirtyJTAG
  ☆14Updated last year
• lawrie / ulx3s_examples
  Example Verilog code for Ulx3s
  ☆40Updated 3 years ago
• freecores / rtf8088
  rtf8088
  ☆10Updated 10 years ago
• emeb / up5k_vga
  A complete 65C02 computer with VGA output on a Lattice Ultra Plus FPGA
  ☆29Updated 6 years ago
• Wren6991 / DVI-PMOD
  DVI PMOD adapter (HDMI connector)
  ☆28Updated 4 years ago
• defparam / PCI2Nano-RTL
  An open source FPGA PCI core & 8250-Compatible PCI UART core
  ☆42Updated 4 years ago
• benitoss / ColorLight_FPGA_boards
  Update IceStudio to support ColorLight 5A-75X, i5 and ICeSugar Pro FPGA boards
  ☆48Updated last year
• lawrie / tiny_ram_soc
  Picorv32 SoC that uses only BRAM, not flash memory
  ☆13Updated 6 years ago
• GMM-7550 / gmm7550-hardware
  CologneChip GateMate FPGA Module: GMM-7550
  ☆22Updated 3 weeks ago
• mattuna15 / merlin
  Learn how to create your own 32-bit system from scratch.
  ☆13Updated 3 years ago
• lmEshoo / sp-i586
  soft processor core compatible with i586 instruction set(Intel Pentium) developped on Nexys4 board boots linux kernel with a ramdisk cont…
  ☆32Updated 8 years ago
• wel97459 / FPGACosmacELF
  A re-creation of a Cosmac ELF computer, Coded in SpinalHDL
  ☆41Updated 4 years ago
• rob-ng15 / Silice-Playground
  Programs for the FOMU, DE10NANO and ULX3S FPGA boards, written in Silice https://github.com/sylefeb/Silice
  ☆35Updated last year
• nockieboy / gpu
  Collaborative project to create an advanced GPU, with additional features to flesh-out the peripherals for a home-made, DIY computer.
  ☆16Updated 2 years ago
• mcleod-ideafix / simple_sdram_controller
  A very simple SDRAM controller for FPGA written in Verilog. It exposes a SRAM-like interface to the rest of the FPGA fabric
  ☆11Updated 6 years ago
• johnwinans / 2057-ICE40HX4K-TQ144-breakout
  Minimal Raspberry PI breakout board for ICE40HX4K FPGA
  ☆22Updated 3 months ago
• jonthomasson / SpartanMini
  A flexible, simple, yet powerful FPGA development board.
  ☆17Updated 7 years ago
• AngeloJacobo / FPGA_SDRAM_Controller
  SDRAM controller optimized to a memory bandwidth of 316MB/s
  ☆27Updated 3 years ago
• robfinch / Cores
  ☆74Updated this week
• openXC7 / openXC7-snap
  snap package for nextpnr PnR FPGA toolchain for Xilinx 7 series FPGAs, with Spartan7, Artix7, Zynq7 and Kintex7 support
  ☆29Updated 11 months ago
• ironsteel / nes_ecp5
  NES FPGA implementation synthesized for the ulx3s ecp5 based fpga board
  ☆37Updated 2 years ago
• nand2mario / ddr3-tang-primer-20k
  DDR3 controller for Tang Primer 20K (Gowin GW2A-18C fpga). DDR3-800 speed and low latency.
  ☆55Updated last year