Alternatives and similar repositories for racechrono-ble-diy-device

Users that are interested in racechrono-ble-diy-device are comparing it to the libraries listed below

• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆66Updated last year
• voltlog / CanLite
  ESP32 based CAN development board
  ☆177Updated 3 years ago
• MagnusThome / RejsaRubberTrac
  RejsaRubberTrac - A wireless thermal camera for monitoring tire temperatures
  ☆149Updated last year
• timurrrr / RaceChronoDiyBleDevice
  DIY BLE device for RaceChrono, currently supports reading data from the CAN bus
  ☆116Updated 4 months ago
• analoghan / CAN_Gauges
  Arduino/Teensy CAN Gauges with OLED displays
  ☆16Updated 7 years ago
• janimm / RealDash-extras
  RealDash examples and technical materials
  ☆149Updated last month
• danielkucera / esp32-can
  ☆32Updated 2 years ago
• renatobo / bonogps
  A GPS setup to log your track lap times, based on ESP32, with the ability to interface with several mobile phone apps that log your speed…
  ☆86Updated 2 months ago
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 3 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆51Updated 5 months ago
• collin80 / ESP32RET
  CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)
  ☆318Updated 8 months ago
• Longan-Labs / Serial_CAN_Arduino
  ☆61Updated 3 years ago
• collin80 / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆346Updated 5 months ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆101Updated 4 years ago
• latonita / arduino-canbus-monitor
  Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…
  ☆324Updated last year
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆56Updated 4 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆193Updated 6 years ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆293Updated 5 months ago
• merkur2k / MSCan_Gauge
  Megasquirt Gauge using CAN bus.
  ☆35Updated 3 years ago
• miwagner / ESP32-Arduino-CAN
  An Arduino CAN-Bus library for ESP32
  ☆369Updated last year
• irvined1982 / arduino-ELM327
  ELM327 Library for Arduino
  ☆71Updated 5 years ago
• robinpipirs / stm32f746-canbus-display
  ☆17Updated 3 years ago
• Tjeerdie / SPECTRE
  Speeduino compatible engine control unit (ECU) based around black STM32F407VET6 board.
  ☆50Updated last year
• HerrRiebmann / KDS2Bluetooth
  Kawasaki Diagnostic Service Reader via Bluetooth
  ☆168Updated 2 years ago
• Hell-Fire / WidebandO2
  An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts
  ☆81Updated 12 years ago
• corygrant / CANBoard_HW
  Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
  ☆41Updated last month
• dedalqq / esp32-mcp2515
  MCP2515 CAN interface library for using on esp32/esp8266
  ☆65Updated 4 years ago
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆67Updated 3 months ago
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆115Updated 6 years ago
• Longan-Labs / Arduino_CAN_BUS_MCP2515
  Arduino CAN Bus library, MCP2515/MCP2551
  ☆148Updated last year