Alternatives and similar repositories for digital_gauge

Users that are interested in digital_gauge are comparing it to the libraries listed below

• omarbadar / ESP-Watch-OBD2
  OBD2 gauge using Lilygo ESP32 watch bluetooth and ELM327 bluetooth OBD2 dongle
  ☆10Updated 2 years ago
• MWP / megasquirt-dash-display
  Dash display project for Megasquirt ECUs based on ESP32 and EVE2
  ☆32Updated 5 years ago
• nopnop2002 / esp-idf-can2usb
  CANbus to USB bridge using esp32
  ☆30Updated 2 weeks ago
• DefinitiveDiagnosis-hub / CAN-Nextion-Dash
  Nextion 3.5" display / arduino/MCP2515 CAN BUS dash display
  ☆11Updated 5 years ago
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆63Updated 2 months ago
• fido-node / esp32_can
  SLCAN over BT for esp32 + mcp2515 + tja1050
  ☆13Updated 6 years ago
• themelisx / ESP32CarODB
  Car OBD gauges Arduino TFT
  ☆19Updated last year
• bouletmarc / Arduino_Honda_OBD1_BM-Duino
  This is an Arduino Honda OBD1 ECU datalogger from CN2, also able to ignition cut
  ☆15Updated 8 years ago
• NewTec-GmbH / esp32-can-iot
  A ESP32 based interface between CAN-bus and IoT environments.
  ☆41Updated 2 years ago
• notchum / OBD_Gauge
  An Arduino-powered automotive gauge using OBDII.
  ☆10Updated 3 years ago
• pawelka / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆12Updated 2 years ago
• Longan-Labs / Longan_CAN_MCP2515
  Arduino Library for CAN Bed
  ☆26Updated 4 years ago
• fkoca5055 / obdnano
  Elm327 and Arduino Nano for VW golf 7 tdi
  ☆11Updated 3 years ago
• skpang / Arduino_CAN-Bus_ECU_reader
  ☆50Updated 8 years ago
• s-marley / CarLights
  Code and schematics for connecting a 5V Arduino to 12V vehicle signals
  ☆24Updated 4 years ago
• akos-sereg / esp32-obd2-v2
  Custom dashboard in car that reads OBD2 via bluetooth
  ☆23Updated 3 years ago
• skpang / Teensy_CAN-Bus_ECU_reader
  ☆39Updated 8 years ago
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆28Updated 7 months ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆49Updated 2 months ago
• pangodream / ESP2SOTA
  Async OTA (AP & Client WiFi modes) for ESP32/ESP8266
  ☆43Updated 2 years ago
• designer2k2 / EMUcan
  ECUMaster EMU CAN Stream Reader Arduino Library
  ☆34Updated 2 weeks ago
• skpang / ESP32_CAN-Bus_demo
  ☆18Updated 2 years ago
• upiir / arduino_dashboard
  Car Dashboard using Arduino Leonardo, OBDII to UART adapter and Intelligent Nextion Display
  ☆29Updated 7 months ago
• Cellgalvano / ESP32_CANViewer
  A ESP32 based CAN interface for your webbrowser
  ☆24Updated 4 years ago
• BennehBoy / LRDuinoTD5
  In car multi gauge system - STM32, SSD1306, MAX31856, L9637D, TD5 ECU
  ☆26Updated last year
• corygrant / USB2CAN_HW
  Hardware - USB to CAN adapter
  ☆12Updated last month
• ubx / CAN-Logger
  CAN Logger based on CAN32 board (ESP32 board with CAN-Bus)
  ☆18Updated 5 years ago
• martinhol221 / ISO14230-4-KWP
  Reading the K-line of the bus according to ISO 14230-4 KWP 10.4 Kbaud
  ☆24Updated 5 years ago
• collin80 / FirmwareReceiver
  ☆14Updated 8 years ago
• omarKmekkawy / Arduino_CANHacker
  This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software
  ☆53Updated 3 years ago