Alternatives and similar repositories for ESP32RET

Users that are interested in ESP32RET are comparing it to the libraries listed below

• collin80 / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆351Updated 7 months ago
• MagnusThome / RejsaCAN-ESP32
  ESP32 and ESP32-S3 board with CAN interface, runs on 12V power (with auto shutdown)
  ☆668Updated 2 months ago
• voltlog / CanLite
  ESP32 based CAN development board
  ☆178Updated 3 years ago
• autowp / can-usb
  Arduino sketch for CAN-BUS adapter
  ☆110Updated 9 years ago
• miwagner / ESP32-Arduino-CAN
  An Arduino CAN-Bus library for ESP32
  ☆376Updated last year
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆273Updated 2 years ago
• limiter121 / esp32-obd2-emulator
  Open-source OBD-II emulator based on an ESP32 + CAN transceiver IC, controllable via WiFi through a simple web UI (or via API)
  ☆456Updated 7 years ago
• janimm / RealDash-extras
  RealDash examples and technical materials
  ☆152Updated 2 months ago
• latonita / arduino-canbus-monitor
  Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…
  ☆325Updated last year
• dedalqq / esp32-mcp2515
  MCP2515 CAN interface library for using on esp32/esp8266
  ☆65Updated 4 years ago
• autowp / arduino-canhacker
  CanHacker (lawicel) CAN adapter on Arduino + MCP2515
  ☆446Updated last year
• muki01 / OBD2_K-line_Reader
  OBD2 K-line Reader (ISO9141 and ISO14230) with microcontrollers like ESP32, Arduino
  ☆132Updated 3 weeks ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆295Updated 6 months ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆140Updated last year
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆34Updated last year
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆66Updated 2 years ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆130Updated 5 months ago
• joshellissh / PiDGC
  Raspberry Pi / Teensy based Digital Gauge Cluster
  ☆75Updated 2 years ago
• smartgauges / canbox
  Firmware for canbus boxes
  ☆106Updated 2 months ago
• sandeepmistry / arduino-OBD2
  An Arduino library for reading OBD-II data from your car over CAN bus
  ☆526Updated 2 years ago
• VaAndCob / ESP32-OBD2-Gauge
  DIY bluetooth obd2 gauge with ESP32 (CYD)
  ☆361Updated 2 months ago
• Cellgalvano / ESP32_CANViewer
  A ESP32 based CAN interface for your webbrowser
  ☆27Updated 4 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆52Updated 6 months ago
• Longan-Labs / Arduino_CAN_BUS_MCP2515
  Arduino CAN Bus library, MCP2515/MCP2551
  ☆148Updated last year
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆97Updated 4 years ago
• HerrRiebmann / KDS2Bluetooth
  Kawasaki Diagnostic Service Reader via Bluetooth
  ☆171Updated 2 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆114Updated 3 years ago
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 3 years ago
• crycode-de / mcp-can-boot
  CAN bus bootloader for AVR microcontrollers attached to an MCP2515 CAN controller.
  ☆39Updated last year
• kostaszaf / can-gateway-sniffer
  An embedded CAN bus sniffer which is able to monitor any of the vehicle internal CAN bus and perform some action by triggering new CAN me…
  ☆72Updated 3 years ago