Xilinx / foc-motor-ctrlLinks
Kria Motor control library
☆20Updated 5 months ago
Alternatives and similar repositories for foc-motor-ctrl
Users that are interested in foc-motor-ctrl are comparing it to the libraries listed below
Sorting:
- STM32F407 + Spartan6 combo with high speed USB TMC interface☆30Updated 5 years ago
- This is BISS-C FPGA IP and It's Driver Repo☆34Updated 2 years ago
- The repository contains the design database and documentation for Electric Drives Demonstration Platform☆101Updated 3 years ago
- High performance motor control☆105Updated 9 years ago
- Zynq-Feather brings the power of a Xilinx Zynq SoC (ARM + FPGA) into the compact Adafruit Feather form factor — enabling modular, high-pe…☆49Updated 4 years ago
- Small Heterogeneous & AI Powered Computing SBC Based on V853☆20Updated 3 years ago
- An inserted spectrum analyzer based on Zynq-7000, which uses scheme for FPGA+ARM standalone.☆24Updated 2 years ago
- Xilinx Zynq SoC based all-in-one quadrocopter flight controller. Stereo 720p side-by-side digital video transmission.☆17Updated 4 years ago
- FMC card to allow interfacing Xilinx FPGA boards with Jetson TX2 or TX1 via CSI-2 camera interface☆20Updated 2 years ago
- FPGA based 30ps RMS TDCs☆91Updated 7 years ago
- Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.☆66Updated 2 years ago
- PID controller with FPGA hardware☆20Updated 6 years ago
- Capture images/video from a Raspberry Pi Camera (MIPI CSI-2) with an FPGA☆73Updated 5 years ago
- tinyVision.ai Vision & Sensor FPGA System on Module☆46Updated 4 years ago
- Application software for Scopy MVP: FPGA PS, PL, and microcontroller firmware☆79Updated 5 years ago
- MIPI CSI-2 Camera Sensor Receiver V2 Verilog HDL implementation For any generic FPGA. Tested with IMX219 IMX477 on Lattice Crosslink NX w…☆61Updated 11 months ago
- CAN with Flexible Data-rate IP Core developed at Department of Measurement of FEE CTU☆28Updated 3 years ago
- This repo contains source, Documentation/reference PCB boards for USB3 camera interface with Lattice Crosslink NX FPGA☆19Updated 3 years ago
- AD7606 driver verilog☆45Updated 6 years ago
- Interfacing ZYNQ SoC device with ADC, Transferring data through DMA and LwIP☆58Updated 4 years ago
- A digital Oscilloscope designed using Zedboard (Zynq7000Soc). The input signal is sample and processed using Zedboard and the sample dat…☆26Updated 5 years ago
- Embedded system code (C and Verilog) which runs the AMDC Hardware☆45Updated 2 months ago
- FPGA code for reading Hamamatsu C9100 data over cameralink using SPEXI FPGA card.☆22Updated 10 years ago
- Verilog UART FIFO that will just echo back characters. Useful for testing the communications path.☆13Updated 10 years ago
- Project which creates an analogic sine signal from an architecture that involves FPGA. It were used a DDS core to generate the sine and S…☆15Updated 11 years ago
- This is 8 channels BISS-C FPGA hardware board design☆27Updated 2 years ago
- ☆40Updated 5 years ago
- SpaceVNX (VITA 74.4) carrier based on Zynq-7000.☆14Updated 3 years ago
- FPGA core boards / evaluation boards based on CDCTL hardware☆94Updated 2 weeks ago
- Time domain reflectometer. Includes Hardware, firmware and GUI in Octave. Also a diploma thesis.☆24Updated 4 years ago