ManpreetSingh80 / CHAPPIELinks
A Self Balancing Robot
☆24Updated 9 years ago
Alternatives and similar repositories for CHAPPIE
Users that are interested in CHAPPIE are comparing it to the libraries listed below
Sorting:
- Arduino - Self balancing robot☆72Updated 11 years ago
- This is the Arduino version of the code for my balancing robot/segway☆77Updated 12 years ago
- A self balancing robot code with steppers and IMU mpu6050☆11Updated 9 years ago
- Git repository for the Balanduino balancing robot☆134Updated 3 years ago
- Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.☆150Updated 11 years ago
- ☆68Updated 6 years ago
- ☆73Updated last year
- B-ROBOT Arduino self balancing robot from JJROBOTS.com☆112Updated 4 years ago
- Example code and PCB design files for the MPU-9105, 9DOF.☆134Updated this week
- Use Arduino IDE to develop STM32 MCU (e.g. RedBear Duo) firmware.☆56Updated 6 years ago
- Program an Arduino Due from a Raspberry PI☆25Updated 4 years ago
- ESP32 port of JJRobots brilliant B-ROBOT_EVO2☆59Updated 3 years ago
- ☆50Updated 8 years ago
- Controller board for wheeled robots, based on the ESP8266 with three DC motors drivers, one-cell LiPo battery charger and Wifi connectivi…☆15Updated 9 years ago
- Arduino Library for interaction and learning about LIDAR-Lite v2 "Blue Label"☆67Updated 6 years ago
- Selfbalancing robot in Arduino. Implemented with PID controllers, FIR filters, complementary filter.☆32Updated 6 years ago
- A Raspberry Pi project for a small robotic arm capable of picking up screws and other metallic things☆106Updated 7 years ago
- ☆17Updated last year
- A simple mavlink example for arduino☆53Updated 8 years ago
- Ultrasonic HC-SR04 library for Arduino IDE☆175Updated 8 years ago
- MPU6050/MPU6500/MPU9150/MPU9250 over I2c for Arduino☆118Updated 7 years ago
- RoboPeak RPLIDAR driver for Arduino and Arduino-compatible devices☆122Updated 3 years ago
- Arduino Quadcopter firmware☆129Updated 10 years ago
- Arduino Libraries☆88Updated 10 years ago
- Arduino library to use timer 2 with a configurable resolution. Based on MsTimer2 by Javier Valencia. Written for the project associated w…☆42Updated 3 years ago
- Arduino library for the Pololu Dual VNH5019 Motor Driver Shield☆52Updated 4 years ago
- A 3D printed balancing robot☆73Updated 8 years ago
- Arduino PPM signal reader/decoder Library☆41Updated 3 years ago
- Omnidirectional robotic platform☆26Updated 9 years ago
- Combination of MPU-9250 and BMP180, I2C device selectable.☆34Updated 5 months ago