Alternatives and similar repositories for QtKvaser

Users that are interested in QtKvaser are comparing it to the libraries listed below

• moonglow / doip_bridge
  Simple doIP to PCAN bridge
  ☆18Updated 4 years ago
• eolatuyi / XCP-Learnings
  An evaluation of XCP protocol while integrating 3rd party sw - vector xcp stack, FreeRTOS on TIVA C Series board (XCP on CAN) and Raspber…
  ☆18Updated 5 years ago
• sz-CHEN / ZCANBus
  A common interface for PeakCAN and KvaserCAN
  ☆14Updated 6 years ago
• as-boards / stm32f107vc
  ☆18Updated 6 years ago
• Seneda / PCAN-UDS-Demo
  An implementation of the PCAN UDS example projects in C#
  ☆17Updated 5 years ago
• chxb1987 / 280xxBootLoader
  BootLoader for F280xx TI DSP
  ☆11Updated 6 years ago
• Bytewerk / pcan_stm32
  ☆23Updated 6 years ago
• 596142041 / STM32-DSP_CAN_Boot
  ☆10Updated 8 years ago
• DoubleMonth / ZLG_USBCAN
  周立功CAN设备上位机
  ☆15Updated 5 years ago
• 596142041 / 28335CAN_Update_Flash
  ☆23Updated 7 years ago
• velarn / F28335-Second-Bootloader
  TMS320F28335 custom bootloader IAP
  ☆15Updated 8 years ago
• FooFooDamon / pcan_cantact
  XCAN firmware for CANtact ( CANable ) or any other similar boards.
  ☆11Updated 2 years ago
• zhangjinxing / BIN2HS
  支持Bin与Hex和Srecord记录之间的解析和转换的库
  ☆14Updated 8 years ago
• lotusczp / Lobster
  Lobster is a PC tool designed mainly for measurement, calibration, debugging of embedded system.
  ☆23Updated 4 years ago
• devcoons / iso14229
  ☆23Updated last year
• rubinsteina13 / C_INDUCTION_MOTOR_ESTIMATORS_LIB
  C-library with implementation of the Induction Motor rotor speed anf flux estimators (observers)
  ☆14Updated 5 years ago
• nxyd / libudslin
  Unified Diagnostic Services (ISO-14229) protocol on LIN
  ☆24Updated 3 years ago
• Se7enXin / CCP_CANape
  ☆28Updated 7 years ago
• 596142041 / CANBootloader-Qt
  基于CAN的IAP所用的上位机
  ☆67Updated 6 years ago
• cymatics1717 / cantest
  dbc parser/ can message emulator with udp socket
  ☆11Updated last year
• tuvok / qtCannelloniCanBus
  ☆12Updated last year
• rusoku / CANAL-View
  CANAL View Qt GUI for TouCAN USB to CAN bus converter
  ☆23Updated 2 years ago
• lotusczp / XcpMaster
  The master node of XCP protocol.
  ☆14Updated 4 years ago
• miaozhendaoren / mcu_uds
  ☆20Updated 9 years ago
• Hirofeng / cantp
  Code implemention of ISO 15765-2 CAN transport layer.
  ☆29Updated 7 years ago
• mach-systems / CANFD-LIN-Gateway
  An STM32CubeIDE project for the CAN-FD LIN Gateway device.
  ☆25Updated 2 years ago
• ShieldQiQi / Servo-Analyzer-FOC
  🌸 Open source CAN BUS analyzer specific for FOC Drive in PMSM/BLDC
  ☆14Updated 5 years ago
• DieBieEngineering / DieBieMS-Bootloader
  This is the bootloader firmware portion of my DieBieMS battery management system.
  ☆27Updated 7 years ago
• DoanNguyenTrong / stm32f4-FreeRTOS-uart-interrupt-queue
  STM32F4 Asynchronous Interrupt (both Receive/Transmit) + Free RTOS queue application
  ☆13Updated 4 years ago
• VGuoGavin / Upper-machine-based-on-Qt
  Central control upper computer, used to control the motor, monitoring the motor running state of the data. The code mainly realizes UART …
  ☆16Updated 4 years ago