Alternatives and similar repositories for VL53L0X-python

Users that are interested in VL53L0X-python are comparing it to the libraries listed below

• johnbryanmoore / VL53L0X_rasp_python
  Python interface to the VL53L0X ST Library
  ☆110Updated last year
• pimoroni / vl53l1x-python
  Python library for the VL53L1X Laser Ranger
  ☆100Updated 3 years ago
• jefmenegazzo / mpu-i2c-drivers-python
  I2C Drivers for MPU-9250, MPU-9255, MPU-9150, MPU-6500, MPU-6555, and MPU-6050
  ☆80Updated 2 years ago
• pololu / vl53l1x-arduino
  Pololu Arduino library for VL53L1X time-of-flight distance sensor
  ☆159Updated last year
• adafruit / Adafruit_CircuitPython_PCA9685
  Adafruit CircuitPython driver for PCA9685 16-channel, 12-bit PWM LED & servo driver chip.
  ☆147Updated 3 months ago
• adafruit / Adafruit_CircuitPython_ServoKit
  CircuitPython helper library for the PWM/Servo FeatherWing, Shield and Pi HAT kits.
  ☆75Updated 3 months ago
• tuupola / micropython-mpu9250
  MicroPython I2C driver for MPU9250 9-axis motion tracking device
  ☆161Updated last year
• sparkfun / SparkFun_TB6612FNG_Arduino_Library
  ☆76Updated 5 years ago
• budryerson / TFMini-Plus-I2C
  Arduino library for the Benewake TFMini-Plus LiDAR distance sensor in I2C communication mode
  ☆28Updated 3 years ago
• budryerson / TFMini-Plus
  Arduino library for the Benewake TFMini-Plus and TFMini-S LiDAR distance sensors.
  ☆70Updated 3 years ago
• sparkfun / SparkFun_VL53L1X_Arduino_Library
  A library for the laser based VL53L1X Time Of Flight distance sensor capable of detecting a target 4m away!
  ☆93Updated last year
• dabmake / ESPROS
  ROS for ESP8266/ESP32
  ☆45Updated 6 years ago
• ZHomeSlice / Simple_MPU6050
  Going Live
  ☆91Updated 5 months ago
• adafruit / Adafruit_CircuitPython_Motor
  Helpers for controlling PWM based motors and servos
  ☆65Updated 3 months ago
• adafruit / Adafruit_CircuitPython_VL53L0X
  CircuitPython module for interacting with the VL53L0X distance sensor.
  ☆39Updated 3 months ago
• adafruit / Adafruit_BNO08x
  Arduino library for BNO08x
  ☆65Updated last year
• micropython-IMU / micropython-mpu9x50
  Drivers for InvenSense inertial measurement units MPU9250, MPU9150, MPU6050
  ☆271Updated 10 months ago
• adafruit / Adafruit_CircuitPython_BNO055
  CircuitPython driver for BNO055 absolute orientation sensor
  ☆92Updated 3 months ago
• madhephaestus / lx16a-servo
  Simple Arduino library to operate LX-16A, LX-224 and LX-15D serial servos
  ☆63Updated last year
• asukiaaa / MPU9250_asukiaaa
  A library for arduino to read value of MPU9250.
  ☆95Updated 2 years ago
• budryerson / TFLuna-I2C
  Arduino library for the Benewake TFLuna LiDAR distance sensor in the I2C communication mode
  ☆35Updated last year
• rppelayo / arduino-self-balancing-robot
  ☆76Updated last year
• RB-ENantel / RC_ESC
  Arduino Library to control R/C ESC's
  ☆65Updated last year
• xkam1x / Arduino-PWM-Reader
  Library for reading PWM signal using interrupts.
  ☆70Updated 7 years ago
• sparkfun / SparkFun_BNO080_Arduino_Library
  An Arduino Library for the BNO080 IMU combination triple axis accelerometer/gyro/magnetometer packaged with an ARM Cortex M0+ running pow…
  ☆89Updated 2 years ago
• chrisb2 / pi_ina219
  This Python library supports the INA219 voltage, current and power monitor from Texas Instruments with a Raspberry Pi using the I2C bus. …
  ☆116Updated 2 years ago
• rocheparadox / Kalman-Filter-Python-for-mpu6050
  This is Kalman filter algorithm written in python language used to calculate the angle, rate and bias from the input of an accelerometer/…
  ☆110Updated 11 months ago
• pimoroni / icm20948-python
  Python library for the Pimoroni ICM20948 breakout
  ☆53Updated last year
• PowerBroker2 / pySerialTransfer
  Python package to transfer data in a fast, reliable, and packetized form
  ☆160Updated 7 months ago
• AndreaLombardo / L298N
  An easy to use Arduino library to control DC motors with an L298N module
  ☆145Updated last year