Frans-Willem / CsrSpiDriversLinks
Implementation of new methods of communicating with Csr BlueCore chips using the BlueLab 4.1 framework, mainly for those without a functional LPT port.
☆61Updated 6 years ago
Alternatives and similar repositories for CsrSpiDrivers
Users that are interested in CsrSpiDrivers are comparing it to the libraries listed below
Sorting:
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆154Updated 7 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆58Updated 11 years ago
- Reimplementation of serprog-duino based on the original flashrom serprog interfacing code (now libfrser).☆74Updated 2 years ago
- Raspberry PI bare metal☆48Updated 11 years ago
- An implementation of the SWD protocol using the Bus Pirate☆90Updated 7 years ago
- Android-based multitouch interface for Rigol oscilloscopes☆27Updated 6 years ago
- Logic Analyzer for the Teensy development boards (pjrc.com/teensy)☆87Updated 4 years ago
- ☆19Updated 7 years ago
- PCB Reverse Engineering tool☆73Updated 9 years ago
- under construction☆93Updated 7 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- Andy's Workshop Reflow Oven Controller☆33Updated 7 years ago
- Automatically exported from code.google.com/p/picoboot☆22Updated 5 years ago
- DroidScript for easier use of the BusPirate on your Android device.☆45Updated 8 years ago
- Drive an old laptop display from an 8-bit AVR microcontroller☆20Updated 9 years ago
- uboot for Rigol DS1xxxZ Oscilloscope☆31Updated 8 years ago
- USB-C Power Delivery on Arduino☆94Updated 5 years ago
- AVR Bus-Pirate-a-like☆90Updated 2 years ago
- Yes, your Arduino can replace an expensive JTAG cable!☆157Updated 12 years ago
- Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi☆18Updated 5 years ago
- A stable ESP8266 port of OpenOCD☆54Updated 5 years ago
- Smallest possible USB compliant device with V-USB☆68Updated 11 years ago
- NuttX port to Fernvale platform☆26Updated 9 years ago
- ChipCon Tiny Loader, a 1KB serial bootloader for CC1110/CC1111☆63Updated 13 years ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆141Updated 2 years ago
- ☆37Updated 9 years ago
- PWM generator for the original Saleae Logic 8☆23Updated 10 years ago
- Source code for DSO138 Oscilloscope Firmware☆72Updated 9 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆30Updated 2 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆34Updated 6 years ago