sysprogs / esp8266-openocdLinks
A stable ESP8266 port of OpenOCD
☆54Updated 6 years ago
Alternatives and similar repositories for esp8266-openocd
Users that are interested in esp8266-openocd are comparing it to the libraries listed below
Sorting:
- Preliminary openocd Xtensa arch support for esp8266, work in progress☆41Updated 10 years ago
- ST-Link dumper firmware☆54Updated last year
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- ☆164Updated 6 years ago
- ESP8266 as wireless JTAG Programmer☆171Updated 7 years ago
- An implementation of the SWD protocol using the Bus Pirate☆90Updated 8 years ago
- Python wrapper for Segger's J-Link Commander & STMicro STLink V2 to flash various ARM MCUs☆123Updated 5 years ago
- Implement Silabs C2 flash protocol via ARM and AVR☆35Updated 10 years ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆143Updated 2 years ago
- Cortex M3 hardware descriptions, library software, and some applications for ST and GD F103 platforms☆38Updated 8 years ago
- USB Power Delivery library☆87Updated 7 years ago
- Utility for encrypting/decrypting ST-Link firmware images☆127Updated 9 years ago
- Hardware design files for the Black Magic Probe☆129Updated 3 years ago
- XBoot Extensible Bootloader☆129Updated 6 years ago
- An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.☆35Updated 6 years ago
- A purely software based USB peripheral for ARM Cortex M0+ devices☆114Updated 11 years ago
- ESP8266 firmware that implements the SWIM protocol for debug access / flashing of STM8 devices☆99Updated last year
- CMSIS-DAP USB-SWD/JTAG adapter firmware for Pro Micro and Teensy 3.2 boards☆90Updated 2 years ago
- Serial bootloader for STM8 microcontrollers☆99Updated 9 months ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆115Updated 11 years ago
- Alternative Logic16 Firmware☆37Updated 10 years ago
- Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs☆142Updated 11 years ago
- DFU bootloader for STM32F103, for use with any F103 code and target☆31Updated 9 years ago
- Access Dallas 1-Wire bus on your PC via low-cost USB to UART bridge.☆166Updated 8 years ago
- Raspberry PI bare metal☆48Updated 11 years ago
- STK500 compatible UPDI programmer firmware for Arduino☆28Updated 7 years ago
- Logic Analyzer for the Teensy development boards (pjrc.com/teensy)☆87Updated 4 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆58Updated 12 years ago
- Sample Analyzer for the Analyzer SDK☆165Updated last year
- A standalone library for the FUSB302 USB-C Power Delivery PHY☆109Updated 7 years ago