satoshinm / pill_duckLinks
Scriptable USB HID device for STM32F103 blue pill (inspired by USB Rubber Ducky) ⛺
☆67Updated 3 years ago
Alternatives and similar repositories for pill_duck
Users that are interested in pill_duck are comparing it to the libraries listed below
Sorting:
- Firmware uploader for ST-Link☆70Updated last year
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆138Updated last year
- An implementation of the SWD protocol using the Bus Pirate☆89Updated 7 years ago
- USB-C Power Delivery on Arduino☆93Updated 5 years ago
- JTAG Versaloon firmware for the STM32 Bluepill board☆142Updated 3 years ago
- This is the fast avr programmer for AVR MCUs based on cheap stm32f103c8t6 board with usb-to-serial support.☆101Updated 7 months ago
- Smallest possible USB compliant device with V-USB☆68Updated 10 years ago
- Raspberry PI bare metal☆48Updated 11 years ago
- Work towards an open source programmer for Padauk MCUs☆74Updated 5 years ago
- In application debugger for ARM Cortex microcontrollers.☆32Updated 8 years ago
- ESP8266 as wireless JTAG Programmer☆168Updated 7 years ago
- copy of the same project from sourceforge☆78Updated 5 years ago
- Source code for DSO138 Oscilloscope Firmware☆72Updated 8 years ago
- Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware☆79Updated last year
- Triple USB-to-serial adapter firmware for flashing onto an STM32F103C8T6 "blue pill" minimum development board ⛺☆139Updated 5 years ago
- Logic Analyzer for the Teensy development boards (pjrc.com/teensy)☆87Updated 4 years ago
- MakeCode UF2 bootloader for STM32 Blue Pill☆77Updated 2 years ago
- 7.2MHz logic analyzer speaking the SUMP protocol for the stm32f103☆88Updated 4 years ago
- PC tool for uplading hexfiles to the STM8 microcontroller via UART or SPI , using the built-in ROM bootloader. Works under Windows and Po…☆85Updated 9 months ago
- Yes, your Arduino can replace an expensive JTAG cable!☆154Updated 12 years ago
- Use raspberry pi as a logic analyser☆78Updated 4 years ago
- ESP8266 firmware that implements the SWIM protocol for debug access / flashing of STM8 devices☆96Updated last year
- A stable ESP8266 port of OpenOCD☆54Updated 5 years ago
- AVR Bus-Pirate-a-like☆89Updated 2 years ago
- A Qi wireless power receiver using attiny13☆57Updated 6 years ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆153Updated 7 years ago
- Serial bootloader for STM8 microcontrollers☆97Updated 5 months ago
- ST-Link dumper firmware☆53Updated last year
- Implementation of new methods of communicating with Csr BlueCore chips using the BlueLab 4.1 framework, mainly for those without a functi…☆61Updated 6 years ago
- USB HID Data Gateway☆55Updated 4 years ago