tuxyme / metal-piLinks
Raspberry PI bare metal
☆48Updated 11 years ago
Alternatives and similar repositories for metal-pi
Users that are interested in metal-pi are comparing it to the libraries listed below
Sorting:
- Yes, your Arduino can replace an expensive JTAG cable!☆156Updated 12 years ago
- Autonomous wireless sensor/actuator node using bluetooth modules based on CSR BlueCore chipset. See wiki for more info.☆154Updated 7 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆29Updated 2 years ago
- Drive an old laptop display from an 8-bit AVR microcontroller☆20Updated 9 years ago
- Logic Analyzer for the Teensy development boards (pjrc.com/teensy)☆87Updated 4 years ago
- OLS is a $50 32 channel Logic Analyzer☆119Updated 14 years ago
- ST-Link dumper firmware☆53Updated last year
- JTAG library for Arduino☆141Updated 8 months ago
- ☆19Updated 7 years ago
- uboot for Rigol DS1xxxZ Oscilloscope☆31Updated 8 years ago
- An implementation of the SWD protocol using the Bus Pirate☆89Updated 7 years ago
- XBoot Extensible Bootloader☆129Updated 6 years ago
- A clone of the i2c-tiny-usb based upon STM32 and libopencm3☆139Updated last year
- ☆52Updated 2 years ago
- USB-PD firmware for the stm32f072 - forked from https://git.clayhobbs.com/pd-buddy/pd-buddy-firmware☆30Updated 5 years ago
- Implement Silabs C2 flash protocol via ARM and AVR☆35Updated 10 years ago
- Example projects for the 1BitSy development boards.☆38Updated last year
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe and…☆68Updated 5 years ago
- Experiments getting a Cypress FX3 SuperSpeed USB3 dev kit to behave as a logic analyzer.☆28Updated 8 years ago
- ESTechnical Reflow Oven Controller source code and instructions☆47Updated 10 years ago
- Implementation of new methods of communicating with Csr BlueCore chips using the BlueLab 4.1 framework, mainly for those without a functi…☆61Updated 6 years ago
- PWM generator for the original Saleae Logic 8☆22Updated 10 years ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆115Updated 11 years ago
- JTAG Versaloon firmware for the STM32 Bluepill board☆142Updated 3 years ago
- Library routines for creating firmware for the Cypress FX2 (CY7C68013 and variants) with SDCC☆148Updated last year
- A stable ESP8266 port of OpenOCD☆54Updated 5 years ago
- Bus Pirate NG firmware and hardware☆39Updated 2 years ago
- SPI driver public repo☆189Updated 2 years ago
- Realtek RTD2660/2662 programmer☆115Updated 7 years ago
- Driver for Adafruit's Si5351 Clockgen Breakout☆44Updated last year