Alternatives and similar repositories for ESP32-SoftwareLIN

Users that are interested in ESP32-SoftwareLIN are comparing it to the libraries listed below

• mestrode / Lin-Interface-Library
  Provide LIN-Master functions (write and request LIN-Frames via hardware UART
  ☆42Updated last year
• pazi88 / STM32_CAN
  CAN bus Library for Arduino STM32
  ☆110Updated 5 months ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆132Updated 6 months ago
• nopnop2002 / Arduino-STM32-CAN
  Can Example for Arduino Core STM32
  ☆256Updated 2 months ago
• moonglow / vector_can
  Vector VN1610 protocol implementation for cheap STM32F4 hardware
  ☆55Updated 3 years ago
• ARoozitalab / ELM327-OBDII-STM32
  this src using stm32f103 as data converter for OBD . support 9141-2 ,15765
  ☆143Updated 6 years ago
• uCAN-LIN / LinUSBConverter
  LIN(Local interconnect network) to USB converter with LIN master support compatible with SLCAN.
  ☆84Updated 3 years ago
• miwagner / ESP32-Arduino-CAN
  An Arduino CAN-Bus library for ESP32
  ☆376Updated last year
• crycode-de / mcp-can-boot
  CAN bus bootloader for AVR microcontrollers attached to an MCP2515 CAN controller.
  ☆39Updated last year
• collin80 / esp32_can
  Arduino ESP32 library supporting the on-chip CAN module
  ☆355Updated 8 months ago
• jsphuebner / stm32-CANBootloader
  Bootloader project to update for example STM32F107 / GD32F107 chips
  ☆17Updated last year
• open-LIN / open-LIN-c
  Implementation of Local interconnect network in c
  ☆80Updated 7 months ago
• dedalqq / esp32-mcp2515
  MCP2515 CAN interface library for using on esp32/esp8266
  ☆69Updated 4 years ago
• collin80 / can_common
  Common structures and functionality for CAN libraries
  ☆141Updated last year
• normaldotcom / canable-fw
  Firmware for the CANable USB to CAN adapter
  ☆233Updated 2 years ago
• eziya / STM32_SPI_MCP2515
  STM32 + MCP2515 CAN Example
  ☆123Updated 2 years ago
• SummerFalls / pcan_cantact
  PCAN firmware for CANtact ( CANable ) or any other similar boards.
  ☆28Updated last year
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆120Updated 6 years ago
• collin80 / ESP32RET
  CAN Reverse engineering tool for ESP32 based boards (specifically EVTV ESP32Due)
  ☆333Updated 10 months ago
• pierremolinaro / acan-esp32
  An ESP32 CAN 2.0B library
  ☆72Updated 5 months ago
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆35Updated last year
• moonglow / pcan_pro_x
  XCAN PRO/PRO FD/FD USB2CAN firmware implementation for cheap STM32F4 hardware
  ☆308Updated 3 years ago
• voltlog / CanLite
  ESP32 based CAN development board
  ☆178Updated 3 years ago
• karlyamashita / CANable_USB_CAN
  Open source project that uses the CANable hardware from protofusion.org
  ☆43Updated 3 months ago
• NewTec-GmbH / esp32-can-iot
  A ESP32 based interface between CAN-bus and IoT environments.
  ☆43Updated 2 years ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆102Updated 4 years ago
• atc1441 / arduino-mcp2515
  Arduino MCP2515 CAN interface library
  ☆40Updated 5 years ago
• iDoka / awesome-linbus
  An awesome LIN bus tools, hardware and resources. It helps a reverse engineering LIN bus devices with lightly specializing in automotive…
  ☆218Updated 2 years ago
• damienmaguire / Stm32-vcu
  A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.
  ☆189Updated last week
• moonglow / kvaser_cantact
  Xvaser LL v2 firmware for CANtact ( CANable ) or any other similar boards.
  ☆49Updated 3 years ago