Alternatives and similar repositories for a0-hardware

Users that are interested in a0-hardware are comparing it to the libraries listed below

• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆198Updated 6 years ago
• laurynas / volvo_linbus
  Volvo LIN bus reader
  ☆99Updated 4 years ago
• Tbruno25 / can-explorer
  Visualize CAN Bus messages in real time
  ☆285Updated 6 months ago
• voltlog / CanLite
  ESP32 based CAN development board
  ☆179Updated 3 years ago
• akpc806a / CAN_Logger
  CAN Bus logger with SD card implemented using ChibiOS
  ☆72Updated 6 years ago
• Alfaa123 / Volvo-CAN-Gauge
  Reverse engineering the Volvo VIDA protocol and CAN network to gather diagnostic information not available via OBD2 on Volvo cars.
  ☆116Updated 3 years ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆122Updated last year
• v-ivanyshyn / parse_can_logs
  Parse CAN logs and visualize data streams on plot
  ☆77Updated last year
• macchina / m2-hardware
  Designs for the Macchina M2
  ☆98Updated 5 years ago
• macchina / LIN
  Arduino library to add dual LIN support on SAM3X based boards with a TJA1021/TJA1027 transceiver
  ☆119Updated 6 years ago
• bri3d / esp32-isotp-ble-bridge
  ESP32-IDF based BLE<->ISO-TP bridge targeting Macchina A0 hardware
  ☆39Updated 3 years ago
• kahiroka / slcanuino
  USB-CAN(SocketCAN) sketch for Arduino CAN-BUS shield
  ☆138Updated 4 years ago
• mestrode / Lin-Interface-Library
  Provide LIN-Master functions (write and request LIN-Frames via hardware UART
  ☆43Updated last year
• Autohome2 / dxControl-Gears
  ☆24Updated 7 years ago
• handmade0octopus / ds2
  DS2 K-line library for Arduino and ESP32
  ☆52Updated 8 months ago
• latonita / arduino-canbus-monitor
  Can bus monitoring tool based on arduino and can bus shield. Implements CAN ASCII/SLCAN protocol compatible with Lawicel CAN232/CANUSB. C…
  ☆328Updated last month
• rusefi / hw_microRusEfi
  microRusEfi board for rusEfi ECU
  ☆84Updated 3 months ago
• nopnop2002 / esp-idf-CANBus-Monitor
  Monitor Canbus traffic
  ☆133Updated 6 months ago
• rusefi / rusefi_documentation
  User documentation for rusEFI engine control unit
  ☆45Updated this week
• damienmaguire / Stm32-vcu
  A Vehicle Control Unit for Electric Vehicle Conversion Projects based on an STM32F107. Software based on the Openinverter Project.
  ☆194Updated 3 weeks ago
• mintynet / esp32-slcan
  ESP32 slcan compatible device
  ☆103Updated 4 years ago
• iDoka / awesome-linbus
  An awesome LIN bus tools, hardware and resources. It helps a reverse engineering LIN bus devices with lightly specializing in automotive…
  ☆222Updated 2 years ago
• Spartelfant / ELM327-BT
  ELM327-based OBD-II Bluetooth interface
  ☆81Updated 5 years ago
• corygrant / dingoPDM
  Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are availabl…
  ☆91Updated last week
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆107Updated 7 years ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆36Updated 8 months ago
• analoghan / CAN_Gauges
  Arduino/Teensy CAN Gauges with OLED displays
  ☆16Updated 7 years ago
• uhi22 / wifican
  Bridge between Wifi and CAN. Minimal variant of the ESP32RET. Using ESP32s3
  ☆35Updated last year
• HeinrichG-V12 / E65_ReverseEngineering
  ☆44Updated 3 years ago
• rnd-ash / Macchina-J2534
  J2534 drivers for various Macchina hardware
  ☆104Updated 3 years ago