Alternatives and similar repositories for opensource-mri-project

Users that are interested in opensource-mri-project are comparing it to the libraries listed below

• crteensy / FETProbe_tiny
  A tiny 1.3 GHz FET Probe
  ☆34Updated 3 years ago
• profdc9 / VNA
  Vector Network Analyzer based on the STM32F103C8T6 bluepill
  ☆88Updated 5 years ago
• marcoreps / laser_driver
  Energy efficient constant current diode laser driver
  ☆49Updated 7 years ago
• loxodes / emc_tools
  experimental open hardware e-field and h-field probes and LISN
  ☆27Updated 3 years ago
• jhol / pyadf435x
  An open source software suite to control the ADF4351 board
  ☆69Updated 4 years ago
• tvelliott / jPCBSim
  Front-end and post processing software for simulating planar RF filters and antennas with the openEMS FDTD field solver.
  ☆27Updated 7 years ago
• loxodes / tdr
  Prototype time domain reflectometer/sampling oscilloscope
  ☆53Updated 6 years ago
• emeb / iceRadio
  C and Verilog sources for STM32F303 + iCE5LP4K Software Defined Radio
  ☆81Updated 8 years ago
• MR-DOS / Si5351-lib
  Si5351 lib for STM32
  ☆64Updated 4 years ago
• bairdd / Zyrus-Etcher
  Zyrus STM Tip Etching Machine
  ☆24Updated 2 years ago
• astuder / epc901
  Experiments with ESPROS epc901 1024x1 CCD line sensor, including a spectroscope.
  ☆56Updated 2 years ago
• myriadrf / component-libraries
  EDA component libraries
  ☆19Updated 8 years ago
• Jana-Marie / temperature-logger
  Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.
  ☆64Updated 2 years ago
• esden / pretty-kicad-libs
  Esden style kicad libraries.
  ☆66Updated last month
• ketszim97 / NearField_PCB_Probes
  PCB Design for H Field and E Field Probes
  ☆28Updated 5 years ago
• goopypanther / OpenFieldProbe
  EMC near-field probe designs
  ☆34Updated 4 years ago
• diorcety / KiBlenderCad
  ☆31Updated 4 years ago
• Radio-Stack / caravel_ft8_receiver
  A fully-integrated FT8 protocol receiver on 130nm CMOS
  ☆61Updated 3 years ago
• xaxaxa-dev / vna
  a simple and cheap vector network analyzer, including support software
  ☆161Updated 5 years ago
• cnlohr / fx3fun
  Treat your Cypress FX3 a little like a logic analyzer or software defined bus.
  ☆166Updated 4 years ago
• whileman133 / fastZ
  Lumped-element impedance calculator and frequency-domain plotter.
  ☆55Updated last year
• loxodes / vna
  Under development open hardware microwave vector network analyzer
  ☆199Updated 2 years ago
• ottingerg / rf-biscuit
  ☆26Updated 9 years ago
• tinylabs / openfixture
  Open Source Hardware Test/Programming Fixture
  ☆117Updated 5 years ago
• lucysrausch / colorlight-led-cube
  64x64 LED Cube based on the Colorlight 5a-75B LED driver board.
  ☆106Updated 3 years ago
• joshajohnson / rf-sig-gen
  MAX2871 based RF Signal Generator in an Adafruit Feather Form Factor
  ☆49Updated 5 years ago
• mithro / kicad-length-matching-checks
  Couple of scripts which checks length matching of your KiCad design.
  ☆26Updated 9 years ago
• larsks / arduino-gpib
  ☆17Updated 9 years ago
• MisterHW / EVAL-MP8862
  A self-contained MP8862 1..20.5V/2A buck-boost DCDC module for breadboard, evaluation and deployment
  ☆14Updated 3 years ago
• drandyhaas / Haasoscope
  Docs, design, firmware, and software for the Haasoscope
  ☆151Updated last year