wisp / impinj-reader-appLinks
App to control the Impinj Speedway RFID reader
☆33Updated 12 years ago
Alternatives and similar repositories for impinj-reader-app
Users that are interested in impinj-reader-app are comparing it to the libraries listed below
Sorting:
- A LLRP based driver for Impinj Speedway COTS RFID reader and UHF passive tags☆66Updated 9 years ago
- Pure-Python client for LLRP-based RFID readers☆177Updated last month
- Gen2 UHF RFID reader with USRP and GNU Radio. Tested with USRPN200 and GNU Radio v3.7.4☆234Updated last month
- Evaluation board for the ThingMagic UHF RFID Module for use with 860 to 920MHz RFID Tags☆37Updated 6 years ago
- PLUTO-GPS-SIM generates a GPS baseband signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADAL…☆32Updated 6 years ago
- EPC C1G2 reader for the USRPv1☆25Updated 10 years ago
- Full HW and SW for pn7462 with more example project☆15Updated 7 years ago
- This is an application that generates ECEF coordinates from a drawn path on a map. The data generated can be used to generate GPS signal …☆16Updated 4 months ago
- Firmware repository for the WISP 5.0☆64Updated 3 years ago
- ☆18Updated last year
- simulate GPS signal like gps-sdr-sim with an UI☆35Updated 3 years ago
- Frequency hopping spread spectrum analyzer and repeat attack program for use with a Nuand BladeRF☆9Updated 10 years ago
- this project make nh7020 firmware☆32Updated 3 years ago
- A DVB-T2 transmitter for GNU Radio☆71Updated 6 years ago
- IEEE 802.11ah transceiver☆27Updated 7 years ago
- srsRAN 4G fork with native LMS API support☆21Updated last week
- ☆33Updated 2 weeks ago
- Tool for measuring Angle of Arrival with BLE5.1 on SDR☆41Updated 5 years ago
- Osmocom DSP utility function library; mirrored from https://gitea.osmocom.org/sdr/libosmo-dsp☆13Updated 3 weeks ago
- Altium design files for WISP 6, including the basic sensor node and add-on boards☆11Updated 2 years ago
- The open-source active RFID system developed by Touraj Ghaffari. This was his life work and we hope it helps you achieve your dreams.☆146Updated 6 years ago
- some gnu radio demo for antsdr☆16Updated 3 years ago
- Open source GPS receiver based on USRP and GN3S☆102Updated 15 years ago
- Allows you to use an Arduino to capture LoRa radio network traffic and transfer to a PC for viewing or saving to disk.☆62Updated 8 years ago
- OFDM implemented in MATLAB for USRP radios with MAC Layer☆44Updated 11 years ago
- bladeRF GPS-SDR-SIM☆25Updated 7 years ago
- Antenna radiation pattern real-time plotting and analysis software☆13Updated 6 months ago
- Raw LoRa test signal samples for the gr-lora project.☆18Updated 8 years ago
- GPIB, USBTMC, serial, TCP, VXI11, and VISA instrument control for GNU octave.☆14Updated 10 years ago
- Tutorial for using the CampusIoT platform☆42Updated last week