ransford / gen2_rfidLinks
EPC C1G2 reader for the USRPv1
☆26Updated 11 years ago
Alternatives and similar repositories for gen2_rfid
Users that are interested in gen2_rfid are comparing it to the libraries listed below
Sorting:
- Gen2 UHF RFID reader with USRP and GNU Radio. Tested with USRPN200 and GNU Radio v3.7.4☆246Updated 7 months ago
- A simple, low-power, low-cost 5.8-6.0 GHz microwave FMCW radar☆112Updated 11 years ago
- Open-source 802.11a WLAN PHY☆66Updated 4 years ago
- FPGA code and Python API for adding chirp functionality to USRP N210 with CBX daughter board, after the required hardware modification.☆35Updated 2 years ago
- IIO AD9361 library for filter design and handling, multi-chip sync, etc.☆97Updated 3 months ago
- Verilog library of EPC Gen-2 RFID Tag Baseband Processor for IC and FPGA designers☆39Updated 4 years ago
- An Open Source Software Package that enables owners of DVB-T dongles with an embedded Realtek RTL2832U chipset to build models in Simulin…☆42Updated 11 years ago
- ☆41Updated 8 years ago
- Software Defined Radio running on STM32 processor.☆89Updated 8 years ago
- RF power detector board design files☆19Updated 9 years ago
- Cypress FX3 firmware for the USB 3.0 LimeSDR board☆68Updated 3 years ago
- MATLAB toolbox for ADI transceiver products☆64Updated last month
- A simple USB powered FMCW radar system☆22Updated 8 years ago
- YunSDR Open Source Project☆13Updated 8 years ago
- LoRa physical layer collision decoding based on GNU Radio☆78Updated 2 years ago
- WISP 5 hardware design repository☆47Updated 8 years ago
- ☆65Updated 9 years ago
- 802.11a PHY Layer Implementation for USRP☆48Updated 3 years ago
- this project make nh7020 firmware☆32Updated 4 years ago
- FMCW radar design files☆156Updated 9 years ago
- IIO blocks for GNU Radio☆105Updated 2 years ago
- The Myriad-RF Reference Hardware design files and firmware☆48Updated 3 years ago
- ANTSDR Firmware☆139Updated 2 years ago
- This is a MATLAB SDR implementation of a LoRa receiver: demodulation and decoding☆28Updated 8 years ago
- Standalone SDR experiment using multicore MCU - FM version☆17Updated 7 years ago
- Altera Cyclone IV FPGA project for the USB 3.0 LimeSDR board☆108Updated 4 years ago
- A module adding spectral estimation routines to GNU Radio.☆59Updated 5 years ago
- Using Software Designed Radio to transmit LTE downlink signals at 2.4 GHz☆45Updated 6 years ago
- A USRP B200 compatible GPSDO board with the u-blox LEA-M8F☆16Updated 9 years ago
- Documentation for the Lime Microsystems Field Programmable RF (FPRF) Transceiver IC☆33Updated 9 years ago