mti-rfid / RFID_ExplorerLinks
MTI RFID Explorer is a software to help people to evaluate MTI UHF RFID modules and reader, including RU-861-XXX, RU-824-000 modules and READ ME reader
☆11Updated 6 years ago
Alternatives and similar repositories for RFID_Explorer
Users that are interested in RFID_Explorer are comparing it to the libraries listed below
Sorting:
- WISP 5 hardware design repository☆47Updated 8 years ago
- ESP32/8266 Arduino as (X)SVF JTAG programmer☆49Updated 7 years ago
- Lime Digital Signal Processing☆28Updated 2 months ago
- Library routines for creating firmware for the Cypress FX2 (CY7C68013 and variants) with SDCC☆148Updated last year
- LUFA port to Silabs EFM32 platform☆17Updated 11 years ago
- Bootloader tool for Cypress PSoC series microcontrollers.☆45Updated 3 years ago
- RDA5981A RDA5981AM RDA5981C☆33Updated 5 years ago
- RF power detector board design files☆19Updated 9 years ago
- A portable driver for the LMS7002M dual transceiver☆30Updated 4 years ago
- MIPI Display Master Bridge IC Driver and Application Development☆20Updated 11 years ago
- SPI kernel driver for ESP8089 devices☆15Updated 11 years ago
- RFFC2071 C8051F330☆16Updated 7 years ago
- USB2Sniffer: High Speed USB 2.0 capture (for LambdaConcept USB2Sniffer hardware)☆58Updated 5 years ago
- JTAG ICE mkI adapter clone for Atmel AVR MCUs☆18Updated 13 years ago
- Port of https://github.com/eleqian/WiDSO/tree/master/MCU/USB-Blaster to GCC and "traditional" STM32F103C8T6 Bluepill board.☆43Updated 6 years ago
- Vector Network Analyzer 10 KHz - 180 MHz☆25Updated 7 years ago
- Turn your STM32F7-Discovery into a portable SDR with RTL-SDR USB dongle☆42Updated 9 years ago
- FX2 replacement for USB-Blaster from http://fpga4u.epfl.ch/wiki/FX2☆23Updated 11 years ago
- ESP8266 Xilinx Virtual Cable - wifi JTAG☆39Updated 4 years ago
- ☆79Updated 6 years ago
- ice40 USB Analyzer☆57Updated 5 years ago
- USB-Blaster instance on CH55x MCU.☆54Updated 6 years ago
- Makefiles for using EFM8 microcontrollers with SDCC☆10Updated 7 years ago
- The program for USB-Blaster Chinese version on STM32 works with☆33Updated 8 years ago
- ☆12Updated 12 years ago
- Verilog library of EPC Gen-2 RFID Tag Baseband Processor for IC and FPGA designers☆40Updated 4 years ago
- Bare metal programming on the EBAZ4205 board with Zynq XC7Z010 SoC☆21Updated last year
- LimeNET-Micro PCB Altium project☆17Updated 2 months ago
- HydraUSB3 (WCH CH569) open source test firmware / examples / libraries to experiment with streaming / high-speed protocols (USB2 HS, USB3…☆89Updated 2 years ago
- STM32F042-based USB to SPI device for programming iCE40 FPGAs☆18Updated 3 years ago